From: BOB GOODWIN (w2bod@worldnet.att.net)
Date: Wed Nov 29 2000 - 18:01:09 CET
          Ok, I deleted the 102 meg DOS partition and set it up
          as ext2 /dev/hdb1. That gives me an extra partition
          that I can use either with muLinux or Red Hat 5.2 on
          this box.
          But I notice that no one touched on my first question
          -
          I can't connect to my ISP [AT&T]. I found
          /usr/bin/ppp and it appears that I never get through
          the entire process. I enter ppp-on and it goes
          through the to the point where it says "Please Wait"
          and dies there?
          PS shows several lines " /bin/setup/   isp status "
          I see on the screen " ./bin/ps: cannot open
          /proc/18368//stat: no such file "  repeated several
          times.
          The modem loudspeaker sounds like it is trying to
          connect but obviously CHAP is not satisfied?
          I can connect to the Tampa Public Library system
          without a problem so I know the modem does work.
          I also know that the ATT CHAP system is pretty fussy
          and I have a script for ppp-on that I am using in
          RH-5.2 and 7.0 but I can't see any place to put it in
          mu 10r5?
          What do I need to do next?
          WHERE IN MULINUX DOES THE PPP-ON STUFF GO?
          This is the file I'm talking about -
          #/usr/sbin/ppp-on
           /usr/sbin/pppd name "987654321@worldnet.att.net" -d
          connect \
           '/usr/sbin/chat -t 45 -v  ABORT BUSY  "" ATDT3424101
          CONNECT ""' \
          /dev/modem 115200 noipdefault debug modem
          defaultroute crtscts
          Copied from my    /etc/ppp/ppp-on    file that I have
          been using with RH-5.2 and 7.0.  This is critical
          with AT&T Worldnet, get one dot out of place and you
          don't connect!
          Thanks.
          Bob Goodwin
Michele Andreoli wrote:
> On Tue, Nov 28, 2000 at 06:41:20AM -0500, BOB GOODWIN nicely wrote:
> >
> > I have mu10r5 working in the the "ext2" configuration in a
> > 138 meg partition. Can I delete the DOS partition [102 megs]
> > and add that to the Linux partition. It looks like I might
> > be able to do that with "cfdisk" which I have in RH-5.2 in
> > another drive.
> >
>
> You have only to format the new disk partition with:
>
>                 # mkfs.ext2 /dev/hdXY
>
> After that, you may put in the /etc/fstab the following entry:
>
> /dev/hdXY       /new             ext2    defaults,auto
>
> At next boot, you will have the disk mounted in /new, or anywhere
> you want.
>
> [faq'ed]
> Michele
>
> --
> In summing up, I wish I had some kind of affirmative message to leave
> you with, I don't. Would you take two negative messages? - Woody Allen
>
> ---------------------------------------------------------------------
> To unsubscribe, e-mail: mulinux-unsubscribe@sunsite.auc.dk
> For additional commands, e-mail: mulinux-help@sunsite.auc.dk
-- Bob Goodwin - Durant, Florida Red Hat Linux release 7.0 Kernel 2.2.16-22 i586
This archive was generated by hypermail 2.1.6 : Sat Feb 08 2003 - 15:27:17 CET