|
| ||||||||||||||||
| XrlCmdMap* _cmds | _cmds |
[protected]
| XrlMfeaTargetBase (XrlCmdMap* cmds = 0)
| XrlMfeaTargetBase |
Constructor.
Parameters:
| cmds | an XrlCmdMap that the commands associated with the target should be added to. This is typically the XrlRouter associated with the target. |
| ~XrlMfeaTargetBase ()
| ~XrlMfeaTargetBase |
[virtual]
Destructor.
Dissociates instance commands from command map.
| bool set_command_map (XrlCmdMap* cmds)
| set_command_map |
Set command map.
Parameters:
| cmds | pointer to command map to associate commands with. This argument is typically a pointer to the XrlRouter associated with the target. |
Returns: true on success, false if cmds is null or a command map has already been supplied.
| const string& name ()
| name |
[const]
Get Xrl instance name associated with command map.
| const char* version ()
| version |
[const]
Get version string of instance.
| XrlCmdError common_0_1_get_target_name (
string& name)
| common_0_1_get_target_name |
[protected pure virtual]
Pure-virtual function that needs to be implemented to:
| XrlCmdError common_0_1_get_version (
string& version)
| common_0_1_get_version |
[protected pure virtual]
Pure-virtual function that needs to be implemented to:
Get version string from Xrl Target
| XrlCmdError common_0_1_get_status (
uint32_t& status,
string& reason)
| common_0_1_get_status |
[protected pure virtual]
Pure-virtual function that needs to be implemented to:
| XrlCmdError common_0_1_shutdown ()
| common_0_1_shutdown |
[protected pure virtual]
Pure-virtual function that needs to be implemented to:
Request clean shutdown of Xrl Target
| XrlCmdError cli_processor_0_1_process_command (
const string& processor_name,
const string& cli_term_name,
const uint32_t& cli_session_id,
const string& command_name,
const string& command_args,
string& ret_processor_name,
string& ret_cli_term_name,
uint32_t& ret_cli_session_id,
string& ret_command_output)
| cli_processor_0_1_process_command |
[protected pure virtual]
Pure-virtual function that needs to be implemented to:
Process a CLI command.
Parameters:
| processor_name | the processor name for this command. |
| cli_term_name | the terminal name the command was entered from. |
| cli_session_id | the CLI session ID the command was entered from. |
| command_name | the command name to process. |
| command_args | the command arguments to process. |
| ret_processor_name | the processor name to return back to the CLI. |
| ret_cli_term_name | the terminal name to return back. |
| ret_cli_session_id | the CLI session ID to return back. |
| ret_command_output | the command output to return back. |
| XrlCmdError ifmgr_replicator_0_1_register_ifmgr_mirror (
const string& clientname)
| ifmgr_replicator_0_1_register_ifmgr_mirror |
[protected pure virtual]
Pure-virtual function that needs to be implemented to:
Register remote mirror of interface state.
| XrlCmdError ifmgr_replicator_0_1_unregister_ifmgr_mirror (
const string& clientname)
| ifmgr_replicator_0_1_unregister_ifmgr_mirror |
[protected pure virtual]
Pure-virtual function that needs to be implemented to:
Register remote mirror of interface state.
| XrlCmdError finder_event_observer_0_1_xrl_target_birth (
const string& target_class,
const string& target_instance)
| finder_event_observer_0_1_xrl_target_birth |
[protected pure virtual]
Pure-virtual function that needs to be implemented to:
Announce target birth to observer.
Parameters:
| target_class | the target class name. |
| target_instance | the target instance name. |
| XrlCmdError finder_event_observer_0_1_xrl_target_death (
const string& target_class,
const string& target_instance)
| finder_event_observer_0_1_xrl_target_death |
[protected pure virtual]
Pure-virtual function that needs to be implemented to:
Announce target death to observer.
Parameters:
| target_class | the target class name. |
| target_instance | the target instance name. |
| XrlCmdError mfea_0_1_have_multicast_routing4 (
bool& result)
| mfea_0_1_have_multicast_routing4 |
[protected pure virtual]
Pure-virtual function that needs to be implemented to:
Test if the underlying system supports IPv4 multicast routing.
Parameters:
| result | true if the underlying system supports IPv4 multicast routing, otherwise false. |
| XrlCmdError mfea_0_1_have_multicast_routing6 (
bool& result)
| mfea_0_1_have_multicast_routing6 |
[protected pure virtual]
Pure-virtual function that needs to be implemented to:
Test if the underlying system supports IPv6 multicast routing.
Parameters:
| result | true if the underlying system supports IPv6 multicast routing, otherwise false. |
| XrlCmdError mfea_0_1_register_protocol4 (
const string& xrl_sender_name,
const string& if_name,
const string& vif_name,
const uint32_t& ip_protocol)
| mfea_0_1_register_protocol4 |
[protected pure virtual]
Pure-virtual function that needs to be implemented to:
Register a protocol on an interface in the Multicast FEA. There could be only one registered protocol per interface/vif.
Parameters:
| xrl_sender_name | the XRL name of the originator of this XRL. |
| if_name | the name of the interface to register for the particular protocol. |
| vif_name | the name of the vif to register for the particular protocol. |
| ip_protocol | the IP protocol number. It must be between 1 and 255. |
| XrlCmdError mfea_0_1_register_protocol6 (
const string& xrl_sender_name,
const string& if_name,
const string& vif_name,
const uint32_t& ip_protocol)
| mfea_0_1_register_protocol6 |
[protected pure virtual]
| XrlCmdError mfea_0_1_unregister_protocol4 (
const string& xrl_sender_name,
const string& if_name,
const string& vif_name)
| mfea_0_1_unregister_protocol4 |
[protected pure virtual]
Pure-virtual function that needs to be implemented to:
Unregister a protocol on an interface in the Multicast FEA. There could be only one registered protocol per interface/vif.
Parameters:
| xrl_sender_name | the XRL name of the originator of this XRL. |
| if_name | the name of the interface to unregister for the particular protocol. |
| vif_name | the name of the vif to unregister for the particular protocol. |
| XrlCmdError mfea_0_1_unregister_protocol6 (
const string& xrl_sender_name,
const string& if_name,
const string& vif_name)
| mfea_0_1_unregister_protocol6 |
[protected pure virtual]
| XrlCmdError mfea_0_1_add_mfc4 (
const string& xrl_sender_name,
const IPv4& source_address,
const IPv4& group_address,
const uint32_t& iif_vif_index,
const vector<uint8_t>& oiflist,
const vector<uint8_t>& oiflist_disable_wrongvif,
const uint32_t& max_vifs_oiflist,
const IPv4& rp_address)
| mfea_0_1_add_mfc4 |
[protected pure virtual]
Pure-virtual function that needs to be implemented to:
Add/delete a Multicast Forwarding Cache with the kernel.
Parameters:
| xrl_sender_name | the XRL name of the originator of this XRL. |
| source_address | the source address of the MFC to add/delete. |
| group_address | the group address of the MFC to add/delete. |
| iif_vif_index | the index of the vif that is the incoming interface. |
| oiflist | the bit-vector with the set of outgoing interfaces. |
| oiflist_disable_wrongvif | the bit-vector with the set of outgoing interfaces to disable WRONGVIF kernel signal. |
| max_vifs_oiflist | the number of vifs covered by oiflist or oiflist_disable_wrongvif . |
| rp_address | the RP address of the MFC to add. |
| XrlCmdError mfea_0_1_add_mfc6 (
const string& xrl_sender_name,
const IPv6& source_address,
const IPv6& group_address,
const uint32_t& iif_vif_index,
const vector<uint8_t>& oiflist,
const vector<uint8_t>& oiflist_disable_wrongvif,
const uint32_t& max_vifs_oiflist,
const IPv6& rp_address)
| mfea_0_1_add_mfc6 |
[protected pure virtual]
| XrlCmdError mfea_0_1_delete_mfc4 (
const string& xrl_sender_name,
const IPv4& source_address,
const IPv4& group_address)
| mfea_0_1_delete_mfc4 |
[protected pure virtual]
| XrlCmdError mfea_0_1_delete_mfc6 (
const string& xrl_sender_name,
const IPv6& source_address,
const IPv6& group_address)
| mfea_0_1_delete_mfc6 |
[protected pure virtual]
| XrlCmdError mfea_0_1_add_dataflow_monitor4 (
const string& xrl_sender_name,
const IPv4& source_address,
const IPv4& group_address,
const uint32_t& threshold_interval_sec,
const uint32_t& threshold_interval_usec,
const uint32_t& threshold_packets,
const uint32_t& threshold_bytes,
const bool& is_threshold_in_packets,
const bool& is_threshold_in_bytes,
const bool& is_geq_upcall,
const bool& is_leq_upcall)
| mfea_0_1_add_dataflow_monitor4 |
[protected pure virtual]
Pure-virtual function that needs to be implemented to:
Add/delete a dataflow monitor with the MFEA.
Parameters:
| xrl_sender_name | the XRL name of the originator of this XRL. |
| source_address | the source address of the dataflow to start/stop monitoring. |
| group_address | the group address of the dataflow to start/stop monitoring. |
| threshold_interval_sec | the number of seconds in the interval to measure. |
| threshold_interval_usec | the number of microseconds in the interval to measure. |
| threshold_packets | the threshold (in number of packets) to compare against. |
| threshold_bytes | the threshold (in number of bytes) to compare against. |
| is_threshold_in_packets | if true, threshold_packets is valid. |
| is_threshold_in_bytes | if true, threshold_bytes is valid. |
| is_geq_upcall | if true, the operation for comparison is ">=". |
| is_leq_upcall | if true, the operation for comparison is "<=". |
| XrlCmdError mfea_0_1_add_dataflow_monitor6 (
const string& xrl_sender_name,
const IPv6& source_address,
const IPv6& group_address,
const uint32_t& threshold_interval_sec,
const uint32_t& threshold_interval_usec,
const uint32_t& threshold_packets,
const uint32_t& threshold_bytes,
const bool& is_threshold_in_packets,
const bool& is_threshold_in_bytes,
const bool& is_geq_upcall,
const bool& is_leq_upcall)
| mfea_0_1_add_dataflow_monitor6 |
[protected pure virtual]
| XrlCmdError mfea_0_1_delete_dataflow_monitor4 (
const string& xrl_sender_name,
const IPv4& source_address,
const IPv4& group_address,
const uint32_t& threshold_interval_sec,
const uint32_t& threshold_interval_usec,
const uint32_t& threshold_packets,
const uint32_t& threshold_bytes,
const bool& is_threshold_in_packets,
const bool& is_threshold_in_bytes,
const bool& is_geq_upcall,
const bool& is_leq_upcall)
| mfea_0_1_delete_dataflow_monitor4 |
[protected pure virtual]
| XrlCmdError mfea_0_1_delete_dataflow_monitor6 (
const string& xrl_sender_name,
const IPv6& source_address,
const IPv6& group_address,
const uint32_t& threshold_interval_sec,
const uint32_t& threshold_interval_usec,
const uint32_t& threshold_packets,
const uint32_t& threshold_bytes,
const bool& is_threshold_in_packets,
const bool& is_threshold_in_bytes,
const bool& is_geq_upcall,
const bool& is_leq_upcall)
| mfea_0_1_delete_dataflow_monitor6 |
[protected pure virtual]
| XrlCmdError mfea_0_1_delete_all_dataflow_monitor4 (
const string& xrl_sender_name,
const IPv4& source_address,
const IPv4& group_address)
| mfea_0_1_delete_all_dataflow_monitor4 |
[protected pure virtual]
| XrlCmdError mfea_0_1_delete_all_dataflow_monitor6 (
const string& xrl_sender_name,
const IPv6& source_address,
const IPv6& group_address)
| mfea_0_1_delete_all_dataflow_monitor6 |
[protected pure virtual]
| XrlCmdError mfea_0_1_enable_vif (
const string& vif_name,
const bool& enable)
| mfea_0_1_enable_vif |
[protected pure virtual]
Pure-virtual function that needs to be implemented to:
Enable/disable/start/stop a MFEA vif interface.
Parameters:
| vif_name | the name of the vif to enable/disable/start/stop. |
| enable | if true, then enable the vif, otherwise disable it. |
| XrlCmdError mfea_0_1_start_vif (
const string& vif_name)
| mfea_0_1_start_vif |
[protected pure virtual]
| XrlCmdError mfea_0_1_stop_vif (
const string& vif_name)
| mfea_0_1_stop_vif |
[protected pure virtual]
| XrlCmdError mfea_0_1_enable_all_vifs (
const bool& enable)
| mfea_0_1_enable_all_vifs |
[protected pure virtual]
Pure-virtual function that needs to be implemented to:
Enable/disable/start/stop all MFEA vif interfaces.
Parameters:
| enable | if true, then enable the vifs, otherwise disable them. |
| XrlCmdError mfea_0_1_start_all_vifs ()
| mfea_0_1_start_all_vifs |
[protected pure virtual]
| XrlCmdError mfea_0_1_stop_all_vifs ()
| mfea_0_1_stop_all_vifs |
[protected pure virtual]
| XrlCmdError mfea_0_1_enable_mfea (
const bool& enable)
| mfea_0_1_enable_mfea |
[protected pure virtual]
Pure-virtual function that needs to be implemented to:
Enable/disable/start/stop the MFEA.
Parameters:
| enable | if true, then enable the MFEA, otherwise disable it. |
| XrlCmdError mfea_0_1_start_mfea ()
| mfea_0_1_start_mfea |
[protected pure virtual]
| XrlCmdError mfea_0_1_stop_mfea ()
| mfea_0_1_stop_mfea |
[protected pure virtual]
| XrlCmdError mfea_0_1_enable_cli (
const bool& enable)
| mfea_0_1_enable_cli |
[protected pure virtual]
Pure-virtual function that needs to be implemented to:
Enable/disable/start/stop the MFEA CLI access.
Parameters:
| enable | if true, then enable the MFEA CLI access, otherwise disable it. |
| XrlCmdError mfea_0_1_start_cli ()
| mfea_0_1_start_cli |
[protected pure virtual]
| XrlCmdError mfea_0_1_stop_cli ()
| mfea_0_1_stop_cli |
[protected pure virtual]
| XrlCmdError mfea_0_1_log_trace_all (
const bool& enable)
| mfea_0_1_log_trace_all |
[protected pure virtual]
Pure-virtual function that needs to be implemented to:
Enable/disable the MFEA trace log for all operations.
Parameters:
| enable | if true, then enable the trace log, otherwise disable it. |
