[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: [oc] linux xilinx webpack programming
I have gotten so far as to install and set up wine, and install ISE5.2.
However, when I run xilinx tools from the command line, nothing
happens -- it does find the xilinx executables, but just doesn't do anything:
thawkins@sparky thawkins $ wine xst
thawkins@sparky thawkins $ wine asdf
/usr/lib/wine/bin/wine: cannot find 'asdf'
The setup has got to be very close because I am able to launch other windows
apps, like notepad; just not the xilinx tools. Here's what I've done to get to this point:
1. Download and install wine. Gentoo Linux makes this easy:
# emerge wine
2. Create a wine configuration directory (this might get created the
first time you run wine -- I can't remember):
$ mkdir /home/thawkins/.wine
3. Edit/create the wine config file (.wine/config).
The important stuff are the drives and the basic config parameters, such as Path.
Here is my config file (sorry for the length):
******** File Start ********
WINE REGISTRY Version 2
;; All keys relative to \\Machine\\Software\\Wine\\Wine\\Config
;; If you think it is necessary to show others your complete config for a
;; bug report, filter out empty lines and comments with
;; grep -v "^;" ~/.wine/config | grep '.'
;;
;; MS-DOS drives configuration
;;
;; Each section has the following format:
;; [Drive X]
;; "Path"="xxx" (Unix path for drive root)
;; "Type"="xxx" (supported types are 'floppy', 'hd', 'cdrom' and 'network')
;; "Label"="xxx" (drive label, at most 11 characters)
;; "Serial"="xxx" (serial number, 8 characters hexadecimal number)
;; "Filesystem"="xxx" (supported types are 'msdos'/'dos'/'fat', 'win95'/'vfat', 'unix')
;; This is the FS Wine is supposed to emulate on a certain
;; directory structure.
;; Recommended:
;; - "win95" for ext2fs, VFAT and FAT32
;; - "msdos" for FAT16 (ugly, upgrading to VFAT driver strongly recommended)
;; DON'T use "unix" unless you intend to port programs using Winelib !
;; "Device"="/dev/xx" (only if you want to allow raw device access)
;;
;; NOTICE: Uncomment and modify the drives you want to use.
;;[Drive A]
;;"Path" = "/mnt/fd0"
;;"Type" = "floppy"
;;"Label" = "Floppy"
;;"Filesystem" = "win95"
;;"Serial" = "87654321"
;;"Device" = "/dev/fd0"
[Drive C]
"Path" = "/opt/xilinx"
"Type" = "hd"
"Label" = "MS-DOS"
"Filesystem" = "win95"
[Drive D]
"Path" = "/mnt/cdrom"
"Type" = "cdrom"
"Label" = "CD-Rom"
"Filesystem" = "win95"
;;[Drive E]
;;"Path" = "/path/to/cdrom"
;;"Type" = "cdrom"
;;"Label" = "CD-Rom"
;;"Filesystem" = "win95"
[Drive F]
"Path" = "/tmp"
"Type" = "hd"
"Label" = "Tmp Drive"
"Filesystem" = "win95"
[Drive H]
"Path" = "${HOME}"
"Type" = "hd"
"Label" = "Home"
"Filesystem" = "win95"
;;[Drive Z]
;;"Path" = "/"
;;"Type" = "network"
;;"Label" = "Root"
;;"Filesystem" = "win95"
[wine]
"Windows" = "c:\\Windows"
"System" = "c:\\Windows\\System"
"Temp" = "f:\\"
"Path" = "c:\\Windows;c:\\Windows\\System;f:\\;c:\\Xilinx;c:\\Xilinx\\bin\\nt"
"Profile" = "c:\\Windows\\Profiles\\Administrator"
"GraphicsDriver" = "x11drv"
; Wine doesn't pass directory symlinks to Windows programs by default.
; Enabling this may crash some programs that do recursive lookups of a whole
; subdir tree in case of a symlink pointing back to itself.
;"ShowDirSymlinks" = "1"
"ShellLinker" = "wineshelllink"
# <wineconf>
[Version]
; Windows version to imitate (win95,win98,winme,nt351,nt40,win2k,winxp,win20,win30,win31)" },
"Windows" = "win98"
; DOS version to imitate
;"DOS" = "6.22"
; Be careful here, wrong DllOverrides settings have the potential
; to pretty much kill your setup.
[DllOverrides]
"rpcrt4" = "builtin, native"
"oleaut32" = "builtin, native"
"ole32" = "builtin, native"
"commdlg" = "builtin, native"
"comdlg32" = "builtin, native"
"ver" = "builtin, native"
"version" = "builtin, native"
"shell" = "builtin, native"
"shell32" = "builtin, native"
"shfolder" = "builtin, native"
"shlwapi" = "builtin, native"
"shdocvw" = "builtin, native"
"lzexpand" = "builtin, native"
"lz32" = "builtin, native"
"comctl32" = "builtin, native"
"commctrl" = "builtin, native"
"advapi32" = "builtin, native"
"crtdll" = "builtin, native"
"mpr" = "builtin, native"
"winspool.drv" = "builtin, native"
"ddraw" = "builtin, native"
"dinput" = "builtin, native"
"dsound" = "builtin, native"
"opengl32" = "builtin, native"
"msvcrt" = "native, builtin"
"msvideo" = "builtin, native"
"msvfw32" = "builtin, native"
"mcicda.drv" = "builtin, native"
"mciseq.drv" = "builtin, native"
"mciwave.drv" = "builtin, native"
"mciavi.drv" = "native, builtin"
"mcianim.drv" = "native, builtin"
"msacm.drv" = "builtin, native"
"msacm" = "builtin, native"
"msacm32" = "builtin, native"
"midimap.drv" = "builtin, native"
; you can specify applications too
;"notepad.exe" = "native, builtin"
; default for all other dlls
"*" = "native, builtin"
[x11drv]
; Number of colors to allocate from the system palette
"AllocSystemColors" = "100"
; Use a private color map
"PrivateColorMap" = "N"
; Favor correctness over speed in some graphics operations
"PerfectGraphics" = "N"
; Color depth to use on multi-depth screens
;;"ScreenDepth" = "16"
; Name of X11 display to use
;;"Display" = ":0.0"
; Allow the window manager to manage created windows
"Managed" = "Y"
; Use a desktop window of 640x480 for Wine
;"Desktop" = "640x480"
; Use XFree86 DGA extension if present
; (make sure /dev/mem is accessible by you !)
"UseDGA" = "Y"
; Use XShm extension if present
"UseXShm" = "Y"
; Use XVidMode extension if present
"UseXVidMode" = "Y"
; Enable DirectX mouse grab
"DXGrab" = "N"
; Create the desktop window with a double-buffered visual
; (useful to play OpenGL games)
"DesktopDoubleBuffered" = "N"
; Code page used for captions in managed mode
; 0 means default ANSI code page (CP_ACP == 0)
"TextCP" = "0"
; Use this if you have more than one port for video on your setup
; (Wine uses for now the first 'input image' it finds).
;; "XVideoPort" = "43"
; Run in synchronous mode (useful for debugging X11 problems)
;;"Synchronous" = "Y"
[fonts]
;Read the Fonts topic in the Wine User Guide before adding aliases
;See a couple of examples for russian users below
"Resolution" = "96"
"Default" = "-adobe-helvetica-"
"DefaultFixed" = "fixed"
"DefaultSerif" = "-adobe-times-"
"DefaultSansSerif" = "-adobe-helvetica-"
;; default TrueType fonts with russian koi8-r encoding
;"Default" = "-monotype-arial-*-*-*--*-*-*-*-*-*-koi8-r"
;"DefaultFixed" = "-monotype-courier new-*-*-*--*-*-*-*-*-*-koi8-r"
;"DefaultSerif" = "-monotype-times new roman-*-*-*--*-*-*-*-*-*-koi8-r"
;"DefaultSansSerif" = "-monotype-arial-*-*-*--*-*-*-*-*-*-koi8-r"
;; default cyrillic bitmap X fonts
;"Default" = "-cronyx-helvetica-"
;"DefaultFixed" = "fixed"
;"DefaultSerif" = "-cronyx-times-"
;"DefaultSansSerif" = "-cronyx-helvetica-"
; the TrueType font dirs you want to make accessible to wine
[FontDirs]
;"dir1" = "/usr/X11R6/lib/X11/fonts/TrueType"
;"dir2" = "/usr/share/fonts/truetype"
;"dir3" = "/usr/X11R6/lib/X11/fonts/TT"
;"dir4" = "/usr/share/fonts/TT"
[serialports]
"Com1" = "/dev/ttyS0"
"Com2" = "/dev/ttyS1"
"Com3" = "/dev/ttyS2"
"Com4" = "/dev/modem"
[parallelports]
"Lpt1" = "/dev/lp0"
[ppdev]
;; key: io-base of the emulated port
;; value : parport-device{,timeout}
;; timeout for auto closing an open device ( not yet implemented)
;"378" = "/dev/parport0"
;"278" = "/dev/parport1"
;"3bc" = "/dev/parport2"
[spooler]
"FILE:" = "tmp.ps"
"LPT1:" = "|lpr"
"LPT2:" = "|gs -sDEVICE=bj200 -sOutputFile=/tmp/fred -q -"
"LPT3:" = "/dev/lp3"
[ports]
;"read" = "0x779,0x379,0x280-0x2a0"
;"write" = "0x779,0x379,0x280-0x2a0"
[Debug]
;"RelayExclude" = "RtlEnterCriticalSection;RtlLeaveCriticalSection"
;"RelayInclude" = "user32.CreateWindowA"
;"SnoopExclude" = "RtlEnterCriticalSection;RtlLeaveCriticalSection"
;"SpyExclude" = "WM_SIZE;WM_TIMER;"
[registry]
;These are all booleans. Y/y/T/t/1 are true, N/n/F/f/0 are false.
;Defaults are read all, write to Home
; Global registries (stored in /etc)
"LoadGlobalRegistryFiles" = "Y"
; Home registries (stored in ~user/.wine/)
"LoadHomeRegistryFiles" = "Y"
; Load Windows registries from the Windows directory
"LoadWindowsRegistryFiles" = "Y"
; TRY to write all changes to home registries
"WritetoHomeRegistryFiles" = "Y"
; Registry periodic save timeout in seconds
; "PeriodicSave" = "600"
; Save only modified keys
"SaveOnlyUpdatedKeys" = "Y"
[Tweak.Layout]
;; supported styles are 'Win31'(default), 'Win95', 'Win98'
;; this has *nothing* to do with the windows version Wine returns:
;; set the "Windows" value in the [Version] section if you want that.
"WineLook" = "Win95"
[Console]
;"Drivers" = "tty"
;"XtermProg" = "nxterm"
;"InitialRows" = "25"
;"InitialColumns" = "80"
;"TerminalType" = "nxterm"
[Clipboard]
"ClearAllSelections" = "0"
"PersistentSelection" = "1"
; List of all directories directly contain .AFM files
[afmdirs]
"1" = "/usr/share/ghostscript/fonts"
"2" = "/usr/share/a2ps/afm"
"3" = "/usr/share/enscript"
"4" = "/usr/X11R6/lib/X11/fonts/Type1"
[WinMM]
"Drivers" = "wineoss.drv"
#"Drivers" = "winearts.drv"
"WaveMapper" = "msacm.drv"
"MidiMapper" = "midimap.drv"
[dsound]
;; HEL only: Number of waveOut fragments ahead to mix in new buffers.
;"HELmargin" = "5"
;; HEL only: Number of waveOut fragments ahead to queue to driver.
;"HELqueue" = "5"
;; Max number of fragments to prebuffer
;"SndQueueMax" = "28"
;; Min number of fragments to prebuffer
;"SndQueueMin" = "12"
;; sample AppDefaults entries
;[AppDefaults\\iexplore.exe\\DllOverrides]
;"shlwapi" = "native"
;"rpcrt4" = "native"
;"ole32" = "native"
;"shdocvw" = "native"
;"wininet" = "native"
;"shfolder" = "native"
;"shell32" = "native"
;"shell" = "native"
;"comctl32" = "native"
;
;[AppDefaults\\setup.exe\\x11drv]
;"Desktop" = "800x600"
;
;[AppDefaults\\sol.exe\\Version]
;"Windows" = "nt40"
;
;; Some games (Quake 2, UT) refuse to accept emulated dsound devices.
;; You can add an AppDefault entry like this for such cases.
;[AppDefaults\\pickygame.exe\\dsound]
;"EmulDriver" = "N"
;; Kazaa Lite
[AppDefaults\\Kazaa.exe\\DllOverrides]
"shdocvw" = "native"
"shlwapi" = "native"
"urlmon" = "native"
# </wineconf>
******** File End ********
4. Create 2 environment variables. I put the following in my .bashrc:
#Xilinx
export XILINX="c:\\Xilinx"
export XIL_LINUX_WINE=1
5. Create the following directories:
# mkdir /opt/xilinx
# mkdir /opt/xilinx/windows
# mkdir /opt/xilinx/windows/system
6. Copy NETAPI32.DLL and NETBIOS.DLL from a Win98 system to /opt/xilinx/windows/system.
Note: Must be Win98. Win2000 DLLs does not work.
A google search got me to a page where I could download these.
7. Copy NOTEPAD.EXE to /opt/xilinx/windows. Test wine with notepad.
It might take awhile for notepad to come up the first time.
$ wine NOTEPAD.EXE
8. I installed ISE5.2 from the CDs. This creates and populates the
/opt/xilinx/Xilinx directory, which is equivalent to C:\\Xilinx
on windows.
# cd /mnt/cdrom
# wine setup.exe
If you don't have the CDs, create /opt/xilinx/Xilinx manually
and move the Xilinx goods into it.
9. This should be all you have to do -- at least that's what xilinx claims.
If anyone can figure out how to proceed from here, please let me know.
Linux users only need the command line verions of XST and the PAR tools.
I heard a rumor Xilinx has announce direct Linux versions by this fall.
Why does it take so long? Why didn't they run their none-GUI code
through gcc years ago?
Anyway, hope this helps.
Regards,
Tom
On Sunday 18 May 2003 07:56 pm, uwe.hartl@gmx.net wrote:
> Hmm, I tried the things this web page tells. I slowly but surely
> become frustrated. I wrote the guy on this web page an email. Will
> see if he responds. He sayd he used Win2k to install and transfered
> to wine later. This does not really help me. If I would be willing
> to work under Windows I would hve bought one.
>
> Uwe
>
> ----- Original Message -----
> From: Rudolf Usselmann <rudi@a... >
> To: cores@o...
> Date: 18 May 2003 10:53:55 +0700
> Subject: Re: [oc] linux xilinx webpack programming
>
> > On Sun, 2003-05-18 at 12:17, uwe.hartl@g... wrote:
> > > Hi John,
> > >
> > > I do not have any Winows stuff on my box. Do you use the wine
> >
> > built in dll's or
> >
> > > do you use the win2K's? Anyway, can you post your wine-config,
> >
> > please?
> >
> > > May be I find what is wrong when I compare yours against mine.
> > >
> > > Thanks for you hints.
> > >
> > > Uwe
> >
> > FYI, there is a web site that is kind of devoted to
> > this subject. Could you perhaps post a summary if/when
> > you get it working ? This is on my T-Do list, but I'm
> > currently to busy to try it out ...
> >
> > http://www.polybus.com/xilinx_on_linux.shtml
> >
> > Cheers !
> > rudi
> > -------------------------------------------------------
> > www.asics.ws -- Solutions for your ASIC/FPGA needs ---
> > ---------------- FPGAs * Full Custom ICs * IP Cores ---
> > * * * FREE IP Cores --> http://www.asics.ws/ <-- * * *
--
Tom Hawkins
Launchbird Design Systems, Inc.
952-200-3790
tom1@launchbird.com
http://www.launchbird.com/
--
To unsubscribe from cores mailing list please visit http://www.opencores.org/mailinglists.shtml