Package: block-badips Version: 0.7.0-1 Architecture: all Maintainer: Thomas Wagner Installed-Size: 55 Depends: bash, ipset, iptables, curl | wget, util-linux, grep, coreutils, sed, gawk | mawk Suggests: bash-completion Filename: all/block-badips_0.7.0-1_all.deb Size: 16588 MD5sum: f69d74b85bdd1fc69f4097c1bd3b9b04 SHA1: 34f5b4f4d4ade40c4b43ac3017d1b6cb4a38f923 SHA256: 9f58c209059b7032227a6a606bf16439eca542d7065be9e01dfa67c488205e6c Section: net Priority: optional Homepage: https://github.com/Aikhjarto/block-badips Description: Block IPs of known brute-force attackers Downloads a list of IPv4 and IPv6 addresses and ranges, by default from blocklist.de, loads it into ipsets and drops their traffic with one iptables rule per address family in the PREROUTING chain of the raw table. Invalid, too broad or suddenly much shorter lists are refused. Package: blocklist-updater Version: 0.1-1 Architecture: all Maintainer: Thomas Wagner Installed-Size: 57 Depends: python3 (>= 3.9) Suggests: bash-completion Filename: all/blocklist-updater_0.1-1_all.deb Size: 13258 MD5sum: 49df869cb7186f3064dd7cb81004e97c SHA1: 9322fc43f6a297eadd0178c5c012579d25ae2bd1 SHA256: 91dc7c85b84c820e831a7ebbaab53a77db470b8b0df0504b0920ae78b75ba745 Section: net Priority: optional Homepage: https://github.com/Aikhjarto/blocklist-updater Description: Download, validate and merge IP blocklists Downloads IP blocklists from several providers (Spamhaus DROP, AbuseIPDB, blocklist.de, CINS Army, Emerging Threats, GreenSnow, DShield and others), validates them and merges them into one list, e.g. for block-badips. Broken downloads keep the previous list, private, reserved and own networks are never published, and stale lists age out. . Each provider is a section in /etc/blocklists/blocklists.conf and is switched on by enabling its timer update-blocklist@
.timer. No unit is enabled on installation; the units run as www-data. Package: cron-check-nagios Source: monitoring-plugins Version: 0-0 Architecture: all Maintainer: Thomas Wagner Installed-Size: 16 Depends: monitoring-plugins-nagios, mailx, cron Filename: all/cron-check-nagios_0-0_all.deb Size: 3146 MD5sum: 5b94a315634c229f84214760faef2b8e SHA1: 4fc444452c030bf4c0957485669242806bde9a3f SHA256: 2499489bf86f528f7735aad3beaac7d66f4af6bd01d5c719a1ca29ff64bbad17 Section: libs Priority: optional Description: Provides a script that can be executed via cron to see if nagios is still up and running. If nagios is down or last log entry longer than a minute ago, a mail is sent to root. Package: journald-remote-follower-rsyslog Version: 0.1-1 Architecture: all Maintainer: Thomas Wagner Installed-Size: 40 Depends: python3 (>= 3.7), python3-systemd, systemd-journal-remote Recommends: rsyslog-relp Filename: all/journald-remote-follower-rsyslog_0.1-1_all.deb Size: 9646 MD5sum: 18db0303cbc736933126e8167d4c7abf SHA1: 3347a9ebf5e3ff199db9daf37965019da144ea35 SHA256: 1ddd9456ef46b9f1d31faa78b69e6ff05831f10b0aacd4b3c223124e93ba4a00 Section: admin Priority: optional Homepage: https://github.com/Aikhjarto/journald-remote-follower-rsyslog Description: Forward systemd-journal-remote journals to rsyslog in arrival order rsyslog's imjournal with Remote="on" merges the local and the remote journals by time and skips entries that are uploaded late. This program reads only the journals that systemd-journal-remote receives, follows them in the order the entries were written and sends every entry to rsyslog's imrelp input. The journal cursor is saved only after rsyslog acknowledged the entries, so delivery is at least once. A backfill mode sends the entries of a time range that are missing from rsyslog's per-host files. . The service is installed but not enabled; rsyslog has to be configured first, see the example in the documentation. Package: logherald Version: 0.3.1-1 Architecture: all Maintainer: Thomas Wagner Installed-Size: 118 Depends: python3 (>= 3.7), python3-yaml, systemd Recommends: go-sendxmpp Suggests: bash-completion, rsyslog Filename: all/logherald_0.3.1-1_all.deb Size: 31674 MD5sum: fa426ccb36d6c16539c9433e39af5302 SHA1: 790ba7803588cf9e789f5d485b22d2f05d039e0b SHA256: db25120328069ba04d9b7928f4723b02f890128030da6888ea85e82a8fb6f04b Section: admin Priority: optional Homepage: https://github.com/Aikhjarto/logherald Description: Filtered log messages by mail and XMPP, as digests and in batches Selects log messages by severity and by include and exclude rules on host, program, facility, message and systemd unit, and sends them by mail and XMPP (go-sendxmpp). "logherald digest" sends a digest of a time span from the systemd journal and the files rsyslog writes, with messages in both counted once; a systemd timer runs it every hour, not enabled by default. "logherald stream" reads the messages rsyslog's omprog writes to its stdin and sends them in batches, after a number of messages or seconds; an example rsyslog configuration is included but not activated. Package: monitoring-plugins-apcaccess Source: monitoring-plugins Version: 0-0 Architecture: all Maintainer: Thomas Wagner Installed-Size: 17 Depends: apcupsd, python3 Filename: all/monitoring-plugins-apcaccess_0-0_all.deb Size: 3610 MD5sum: 997b386c7cf12b5f3141e17c1e51e216 SHA1: 288e0455c0c64cd8fb69699eb4c422a92d7e7684 SHA256: c072f30dcbf1c6b191b102c24bd736a552925042d2e2ab66fa46580132eb7527 Section: libs Priority: optional Description: Uses apcaccess to retrieve data from a running apcupsd. Package: monitoring-plugins-bareos-job Version: 1.2-2 Architecture: all Maintainer: Thomas Wagner Installed-Size: 271 Depends: python3 (>= 3.7), python3-psycopg2 Filename: all/monitoring-plugins-bareos-job_1.2-2_all.deb Size: 231240 MD5sum: 69473e4ade4c8df7449a004dfc5486c0 SHA1: fee48c7965d56fed53b23272824b59f6b5030493 SHA256: 52a2c90e3a982654d54f4e6342298780dc79aed27b22306213da0247dcf2e41e Section: net Priority: optional Homepage: https://github.com/Nemester/check-bareos-job Description: Nagios/Icinga plugin to check a Bareos backup job Checks a specific Bareos backup job via the Bareos PostgreSQL catalog, optionally only its most recent run, and reports files, size, duration and age as performance data. Package: monitoring-plugins-bareos-pool Version: 1.0-2 Architecture: all Maintainer: Thomas Wagner Installed-Size: 43 Depends: python3 (>= 3.10), python3-psycopg2 Recommends: nagios-nrpe-plugin Filename: all/monitoring-plugins-bareos-pool_1.0-2_all.deb Size: 14650 MD5sum: b7f46a5bb13c2dc3857859e59bbe3157 SHA1: fa8cbda82b32cbe5faadc65d3c98bcf7c13ebc17 SHA256: 60ceb1db92cfbb7368663918f54c5fdc902c2162404c562a57f8827916735b58 Section: net Priority: optional Homepage: https://github.com/Nemester/check-bareos-pool Description: Nagios/Icinga plugin to check the tapes in Bareos pools Checks the number of tapes in a Bareos pool via the Bareos PostgreSQL catalog, and the number of volumes overdue for recycling back to the scratch pool. check_bareos_pool_nrpe.sh runs the check on a remote host via NRPE. Package: monitoring-plugins-bareos-tape Version: 1.1-2 Architecture: all Maintainer: Thomas Wagner Installed-Size: 44 Depends: python3 (>= 3.10), python3-psycopg2 Recommends: nagios-nrpe-plugin Filename: all/monitoring-plugins-bareos-tape_1.1-2_all.deb Size: 14972 MD5sum: 99e3f9e0afae1f634bed9d9c3e2d7828 SHA1: 1a81bd1d4822a3d6a096ded16f371df110cc98f9 SHA256: 42a4ef06a2816cf4feb6a5430e54b4777ea1b370afd67aedb5dfbdf0418b6ded Section: net Priority: optional Homepage: https://github.com/Nemester/check-bareos-tape Description: Nagios/Icinga plugin to check the lifecycle of Bareos tapes Checks the lifecycle state of Bareos tape volumes via the Bareos PostgreSQL catalog: recycle count, mount count, write errors, tape age and volume status. check_bareos_tape_nrpe.sh runs the check on a remote host via NRPE. Package: monitoring-plugins-block-badips Source: block-badips Version: 0.7.0-1 Architecture: all Maintainer: Thomas Wagner Installed-Size: 24 Depends: sudo, bash, grep, ipset, iptables Suggests: bash-completion Filename: all/monitoring-plugins-block-badips_0.7.0-1_all.deb Size: 5138 MD5sum: 0de4caa0d70b86d227de41d0a3cf04bc SHA1: 694a57f735ba5139224cb31e7da4d009f480940b SHA256: 74298aa4fe72377eb128742c3f19be17fc6b44d0b01cb8a3153d6d01297dbe2f Section: libs Priority: optional Homepage: https://github.com/Aikhjarto/block-badips Description: Nagios/Icinga plugin to check the blocklists of block-badips Checks the number of blocked entries, the age of the last update, ipsets that no rule uses and nearly full ipsets. A sudoers snippet for the user nagios is included. Package: monitoring-plugins-cups-printer Source: monitoring-plugins Version: 0-0 Architecture: all Maintainer: Thomas Wagner Installed-Size: 17 Depends: cups-client Filename: all/monitoring-plugins-cups-printer_0-0_all.deb Size: 3282 MD5sum: 8e4e632f934b2981b31aafe876e76ac3 SHA1: 3e992cc08fa0f92a2de8f2a34457d40afffc0429 SHA256: a10566044fcca0b7f177d1d088d8a4c803df68375ca82690bb3b2b175cc5bb11 Section: libs Priority: optional Description: Checks if cups provides a certain printer. Package: monitoring-plugins-cups-queue Source: monitoring-plugins Version: 0-0 Architecture: all Maintainer: Thomas Wagner Installed-Size: 19 Depends: cups-client Filename: all/monitoring-plugins-cups-queue_0-0_all.deb Size: 4484 MD5sum: d681e6984bacb5c386faed06f0ef4e52 SHA1: 70de17e3bd311d531768c5885baabd54549bc641 SHA256: fd170f11d4dd5ab1f7737fba687e0fa331f4db15f93bff8ef81519b669db9b6d Section: libs Priority: optional Description: Checks the length of a printer queue in cupsd. Package: monitoring-plugins-dd-wrt-inet-access Source: monitoring-plugins-dd-wrt Version: 0.2-1 Architecture: all Maintainer: Thomas Wagner Installed-Size: 17 Depends: openssh-client Suggests: bash-completion Filename: all/monitoring-plugins-dd-wrt-inet-access_0.2-1_all.deb Size: 3304 MD5sum: 30bfac9924a7b6af7ed20728bcb293ca SHA1: 1ece37d936541c38dbb2b6235f12486071830136 SHA256: f50b86b3bf6f239b57540a33153927c3ad5ec7c083db7c9523a191ca7b7a473f Section: net Priority: optional Homepage: https://github.com/Aikhjarto/check_dd-wrt Description: Check if a router running dd-wrt has internet connection Logs in via ssh on a router running dd-wrt and tries to access a certain website with w3m to check if internet access is given. Package: monitoring-plugins-dd-wrt-ps Source: monitoring-plugins-dd-wrt Version: 0.2-1 Architecture: all Maintainer: Thomas Wagner Installed-Size: 17 Depends: openssh-client Suggests: bash-completion Filename: all/monitoring-plugins-dd-wrt-ps_0.2-1_all.deb Size: 3430 MD5sum: ce9ab4b0188adede1f9e7b46b78304d3 SHA1: 85afc9bf6c577bbaa37e1df5d491888687a65526 SHA256: a3d107defeb840e1b10caea39366948439d85527ba7dadbe453936301b1068b0 Section: net Priority: optional Homepage: https://github.com/Aikhjarto/check_dd-wrt Description: Check running processes on a dd-wrt router Logs in via ssh on a router running dd-wrt and checks with a list of given processes if all of them are running. Package: monitoring-plugins-dns-pl Source: monitoring-plugins Version: 0-0 Architecture: all Maintainer: Thomas Wagner Installed-Size: 44 Filename: all/monitoring-plugins-dns-pl_0-0_all.deb Size: 9578 MD5sum: c4c27f0a8d88e3dc8770398fc1720dc9 SHA1: 94b1f75c782f45af40db98d857290760820f6cc2 SHA256: ba45a512c728621d3f0468b7122e2b02b94f270810a7efa5319b7b75e89defe9 Section: libs Priority: optional Description: Uses perl to query a DNS server and checks the response. See https://github.com/thorfi/nagios-bind9-plugin. Package: monitoring-plugins-esphome-sensor Version: 0.3.1-1 Architecture: all Maintainer: Thomas Wagner Installed-Size: 55 Depends: python3 (>= 3.8), python3-requests Recommends: python3-aioesphomeapi Suggests: bash-completion Filename: all/monitoring-plugins-esphome-sensor_0.3.1-1_all.deb Size: 15554 MD5sum: 32e9f3af881fa72e12dea487f5c53884 SHA1: f2c3a8ff46b4b576c73ee886d789a7e937eb99a3 SHA256: c9941924ef95091f4296bc0c66dc9ff1eea8ab8acbad52bc6f3c3ae0e806fff6 Section: net Priority: optional Homepage: https://github.com/Aikhjarto/check_esphome_sensor Description: Checks ESPHome devices via the native API or web_server v3 Checks ESPHome devices via either the web_server (version 3) HTTP JSON API (with optional HTTP basic auth) or the native API component (with optional plaintext password or Noise PSK encryption key). Supports checking a numeric sensor/text_sensor value against thresholds (-c may be smaller than -w), the time offset of a sensor against the local clock or an NTP server, and a boolean expression over multiple binary_sensor entities. --mode api additionally requires the python3 module aioesphomeapi to be installed separately. Package: monitoring-plugins-exim-queue Source: monitoring-plugins Version: 0-0 Architecture: all Maintainer: Thomas Wagner Installed-Size: 15 Depends: exim4 Filename: all/monitoring-plugins-exim-queue_0-0_all.deb Size: 3104 MD5sum: 78f7bbe55d1ac39df51f50667db5d566 SHA1: 70e969d95f4487f1b667f8794403c47346d9b784 SHA256: 4771f068942254c1a1eca78f941d822bca818af362f5f3ce188d1f426a855e54 Section: libs Priority: optional Description: Uses exim -bpc to check the length of the queue of exim. Package: monitoring-plugins-file-age2 Source: monitoring-plugins Version: 0-0 Architecture: all Maintainer: Thomas Wagner Installed-Size: 18 Filename: all/monitoring-plugins-file-age2_0-0_all.deb Size: 3916 MD5sum: e2d8c495fd28d3b385020808864b69f8 SHA1: 1075315a3e86ef3d1e2796feb042c35d80082084 SHA256: a4dd13b839956fa07d2d02b38eadb6cd19d74e6ef1ec61d9c0e88a682ebbc07e Section: libs Priority: optional Description: Check file age and size but has a mode to not report error on missing files. Thus file-age2 is suitable for lock files. Package: monitoring-plugins-file-exists Source: monitoring-plugins Version: 0-0 Architecture: all Maintainer: Thomas Wagner Installed-Size: 15 Filename: all/monitoring-plugins-file-exists_0-0_all.deb Size: 2982 MD5sum: 9ec7b359abb5aaba516856077215818e SHA1: 1d68ec14f462ccfe6685c1db0aeabe7728235d2a SHA256: 313568ec954f908557bf7833e7ad41ee0b1ccc1b5e6381d7ce00f01e2ffab20e Section: libs Priority: optional Description: Uses test command to check if a file exists. Can also be used for device files /dev/*. Package: monitoring-plugins-fileage Source: monitoring-plugins Version: 0-0 Architecture: all Maintainer: Thomas Wagner Installed-Size: 21 Depends: python3 Filename: all/monitoring-plugins-fileage_0-0_all.deb Size: 4066 MD5sum: c1f101c99a746aa368176d772e124921 SHA1: 0624c830bd0cfe75d4a1c05833c136aa37b8885c SHA256: e5c6e109ed17f537f583f9f0847c2402a04d7156e9e7069ca9d81a77e8ac2e81 Section: libs Priority: optional Description: Checks if a file is younger than a certain age. Useful for checking arbitrary daemons that write to files periodically. Package: monitoring-plugins-flexlm-server Version: 0.3-1 Architecture: all Maintainer: Thomas Wagner Installed-Size: 35 Depends: python3 (>= 3.7) Recommends: openssh-client Suggests: bash-completion Breaks: monitoring-plugins-flexlm (<< 1) Replaces: monitoring-plugins-flexlm (<< 1) Filename: all/monitoring-plugins-flexlm-server_0.3-1_all.deb Size: 10280 MD5sum: 1eae1fce1594d1378d5bcbff2b812dd2 SHA1: b7b48f1aa32a44bdb93df1d45ec65e06885c4312 SHA256: 1fc6f03a144f24d07f4c39f421f17c45acf3e206ff3bd744a49a3b18c4ae91c2 Section: net Priority: optional Homepage: https://github.com/ThomasWagnerJKU/check_flexlm_server Description: Nagios/Icinga plugin to check FlexLM license servers Nagios/Icinga plugin that checks a FlexLM (FlexNet Publisher) license server with lmutil, written in Python 3 with the standard library only. . It checks that the license server and all vendor daemons are up, reports the usage of every feature as performance data, and alerts on the days until the earliest expiry of any feature. lmutil is not included; it comes with the licensed software, and --ssh runs it on the license server. Package: monitoring-plugins-folder Source: monitoring-plugins Version: 0-0 Architecture: all Maintainer: Thomas Wagner Installed-Size: 23 Depends: libmonitoring-plugin-perl Filename: all/monitoring-plugins-folder_0-0_all.deb Size: 4914 MD5sum: 36d23bb59522c6dc3b4a02e397ee829e SHA1: 0abe2e1859c9deab5a2181a9a2e4075cc8a2ebb5 SHA256: 953e4f12085c3cbd2d70dbee87985269913fbf0fefa3ea833b8c6a4f4b57b62d Section: libs Priority: optional Description: Checks files in a given folder for count, total size and age, using thresholds in monitoring-plugins format. Package: monitoring-plugins-ftp Source: monitoring-plugins Version: 0-0 Architecture: all Maintainer: Thomas Wagner Installed-Size: 17 Filename: all/monitoring-plugins-ftp_0-0_all.deb Size: 3656 MD5sum: b5f18b2ca3f050b0c357dfe35bbe0dba SHA1: 4fa34f395215afece59e78c4ff276841cc49549a SHA256: 565b46335dfaa74ab7544170f99938cdd1603d69cfabd9b8813acdf63e4361cc Section: libs Priority: optional Description: Checks if an ftp server is up and running by logging in. Package: monitoring-plugins-gitlab Version: 0.3-1 Architecture: all Maintainer: Thomas Wagner Installed-Size: 38 Depends: python3 (>= 3.7) Suggests: bash-completion Filename: all/monitoring-plugins-gitlab_0.3-1_all.deb Size: 11932 MD5sum: 4b157c609124d65697c7894927123dcd SHA1: f2d5e83bd9b997e87fd8c34aaf8521eb5d4f144b SHA256: cfb737682211186ceb3aa0b6b7a89bcc3852ec7f5e4c925fbe042769fb19c1ec Section: net Priority: optional Homepage: https://github.com/ThomasWagnerJKU/check_gitlab Description: Nagios/Icinga plugin to check a GitLab instance Nagios/Icinga plugin for GitLab, written in Python 3 with the standard library only. It queries the GitLab REST API, so the monitoring host needs nothing but network access and an access token. . Modes: * health: does the API answer, which version runs, and how fast * token: how many days the monitoring token itself is still valid * stats: users, projects, groups, issues and merge requests * sidekiq: background job processing and backlog * migrations: failed or unfinished batched background migrations * rotate: renews the access token before it expires, run from cron (not a check) . Thresholds follow the monitoring plugins range syntax and the plugin prints performance data for every mode. Package: monitoring-plugins-hassio Source: monitoring-plugins Version: 0-0 Architecture: all Maintainer: Thomas Wagner Installed-Size: 21 Depends: python3, python3-requests Filename: all/monitoring-plugins-hassio_0-0_all.deb Size: 4302 MD5sum: 3b74cfa8bb53adddfeea2a6e997d7caa SHA1: 2c478af942add91c97bc8f89bc8103b37647a612 SHA256: b40b4010f9fd2c76719306e2dc875d54395afd8d6d698068a96a44c2fcf98868 Section: libs Priority: optional Description: Queries sensors of a Home Assistant instance via its REST API and compares their states against expected string, timestamp or numeric values. Package: monitoring-plugins-homeassistant-sensor Version: 0.2.1-1 Architecture: all Maintainer: Thomas Wagner Installed-Size: 47 Depends: python3 (>= 3.8) Suggests: bash-completion Filename: all/monitoring-plugins-homeassistant-sensor_0.2.1-1_all.deb Size: 13436 MD5sum: 4920bbe32716c3a608c95487dae3d643 SHA1: d846e9928ccb59a9050f69545c5cf0ad001787ae SHA256: 90616878d00ee65ee4d6e210267332c7c1de53d5468a2022b8e0de7554e8f6a3 Section: net Priority: optional Homepage: https://github.com/Aikhjarto/check_homeassistant_sensor Description: Checks Home Assistant entities via its REST API Checks Home Assistant entities via its REST API, with a long-lived access token. Supports checking a numeric state or attribute against thresholds (-c may be smaller than -w), that one entity stays above or below another by a margin (e.g. a wall temperature above the dew point), how long ago an entity last reported, the time offset of a timestamp entity, a boolean expression over on/off entities, and a regular expression against a state. Unavailable entities are CRITICAL by default. Package: monitoring-plugins-immich Version: 0.4.1-1 Architecture: all Maintainer: Thomas Wagner Installed-Size: 35 Depends: python3 (>= 3.7) Suggests: bash-completion Filename: all/monitoring-plugins-immich_0.4.1-1_all.deb Size: 10414 MD5sum: ac6c768e4e47cce25d526e3dadaea25b SHA1: 375c8d634ca47416208829bc99b9fc9a0f536491 SHA256: b3c688282e81fc7d58f569c4ef6515b4903170666d5c3fb8d10d698c1ab38f90 Section: net Priority: optional Homepage: https://github.com/Aikhjarto/check_immich Description: Nagios/Icinga plugin to check an Immich instance Nagios/Icinga plugin for Immich, written in Python 3 with the standard library only. It queries the Immich REST API, so the monitoring host needs nothing but network access and an API token. . Modes: * health: does the server answer its ping endpoint, and how fast * storage: how much of the storage is used * stats: how many photos and videos are stored, and how much space they use * rotate: gives the API key a new secret, run from cron (not a check) . Thresholds follow the monitoring plugins range syntax and the plugin prints performance data for every mode. Package: monitoring-plugins-influxdb Version: 0.2.1-1 Architecture: amd64 Maintainer: Thomas Wagner Installed-Size: 7904 Depends: libc6 (>= 2.34) Filename: amd64/monitoring-plugins-influxdb_0.2.1-1_amd64.deb Size: 2675928 MD5sum: d15eca4a7c3fc04f831526ff75bffb47 SHA1: 220cf9afc2aacc8639301c6ddef502a220b57a43 SHA256: efd196ed9ef9a7ce122d734edfd9ef8b9483917d8f81a6f4bff3b6481c6b3742 Section: net Priority: optional Homepage: https://github.com/NETWAYS/check_influxdb Description: Nagios/Icinga plugin to check InfluxDB Icinga/Nagios check plugin for InfluxDB written in Go. It can check the health endpoint of an InfluxDB instance and evaluate the result of a Flux query against thresholds. . Both InfluxDB 1.8 (with the /health endpoint) and 2.x are supported. Package: monitoring-plugins-influxdb-data-age Version: 0.2.1-1 Architecture: all Maintainer: Thomas Wagner Installed-Size: 36 Depends: python3 (>= 3.7) Suggests: bash-completion Filename: all/monitoring-plugins-influxdb-data-age_0.2.1-1_all.deb Size: 10328 MD5sum: d6b20e019b9daa4c6ed31b86b11514a7 SHA1: bd9356b2f14fcf909a57ff62cd381816707940c7 SHA256: 2044a6b828845516a8b4b9db863bb90b21984a6d0673666aa477ff6aa46116f8 Section: net Priority: optional Homepage: https://github.com/Aikhjarto/check_influxdb_data_age Description: Nagios/Icinga plugin to check the age of the newest data in InfluxDB Nagios/Icinga plugin that checks how old the newest data is that an InfluxDB 2 Flux query returns, to catch measurements that stopped arriving. Written in Python 3 with the standard library only. The plugin was check_influxdb_data_age.py in the monitoring-plugins collection; that name is kept as a link. Package: monitoring-plugins-ipmi-power Source: monitoring-plugins Version: 0-0 Architecture: all Maintainer: Thomas Wagner Installed-Size: 16 Depends: freeipmi, ipmitool Filename: all/monitoring-plugins-ipmi-power_0-0_all.deb Size: 3532 MD5sum: db686e0715e823b4409e3eba03fe26ed SHA1: 056fb1581850852b23480a47fb82c67817b54f1e SHA256: 7bf7c0eb4fe4706392e0fa62aaa6dae7cdbdd66d75ee63d7404e340ad538e3a0 Section: libs Priority: optional Description: Uses ipmitool from freeipmi to check is a system is powered. Useful as master for service dependencies. Package: monitoring-plugins-ipmi-sensor3 Version: 3.14-2 Architecture: all Maintainer: Thomas Wagner Installed-Size: 70 Depends: perl:any, freeipmi-tools (>= 0.5.1), libipc-run-perl Conflicts: monitoring-plugins-ipmi-sensor1, monitoring-plugins-ipmi-sensor2 Filename: all/monitoring-plugins-ipmi-sensor3_3.14-2_all.deb Size: 28044 MD5sum: b428844b63df6bc69f88734363b63b25 SHA1: 672fc5723b7dc6bf60397712cc95cb78dea16bdb SHA256: b4d7ac25f3d69af1aa4c47d6bffcd736bd53d3e920eded6716609eb1e35d4e4b Section: net Priority: optional Homepage: https://github.com/thomas-krenn/check_ipmi_sensor_v3 Description: Nagios/Icinga plugin to check IPMI sensors using FreeIPMI This plugin uses FreeIPMI tools to check IPMI sensors. Sensors can be checked all at once, in groups, or individually. Performance data is provided. Package: monitoring-plugins-isg-wpm-sensor Version: 0.2.1-1 Architecture: all Maintainer: Thomas Wagner Installed-Size: 62 Depends: python3 (>= 3.8) Suggests: bash-completion Filename: all/monitoring-plugins-isg-wpm-sensor_0.2.1-1_all.deb Size: 17650 MD5sum: e852c5f03aff10c295dc7b0e0950c94d SHA1: e01406c091c8133b871663a36c29d06ab2a2e8b3 SHA256: c7bcc54aa2cd8afdd8764d9d5fd67a3d30681dde721df1f84837be5f4777a8a3 Section: net Priority: optional Homepage: https://github.com/Aikhjarto/check_isg_wpm_sensor Description: Checks Stiebel Eltron heat pumps with WPM via Modbus TCP of the ISG Checks a Stiebel Eltron heat pump with a heat pump manager WPM (WPMsystem, WPM 3, WPM 3i) via the Modbus TCP interface of the Internet Service Gateway (ISG web with the Modbus TCP/IP software extension). Supports checking a numeric value against thresholds (-c may be smaller than -w), that one value stays above or below another by a margin, a boolean expression over pumps and status bits, a regular expression against a coded value such as the operating mode, and faults and bus errors. The plugin only reads registers. Package: monitoring-plugins-jitsi Source: monitoring-plugins Version: 0-0 Architecture: all Maintainer: Thomas Wagner Installed-Size: 23 Depends: python3-requests Filename: all/monitoring-plugins-jitsi_0-0_all.deb Size: 5136 MD5sum: c0c1d77bb3575bed1368c8c065a56ccb SHA1: 714a6d93bf47966801a1d326629d563a7c40d717 SHA256: 7c7dc0cc12a748a3ac603dc8cbbfa32bc416b5801bacf47a23c22a176b0f96ef Section: libs Priority: optional Description: Uses jitsi's JVB API to optain statistics from jitsi services. Package: monitoring-plugins-linux-raid Source: monitoring-plugins Version: 0-0 Architecture: all Maintainer: Thomas Wagner Installed-Size: 18 Conflicts: nagios-plugins-linuxraid Replaces: nagios-plugins-linuxraid Filename: all/monitoring-plugins-linux-raid_0-0_all.deb Size: 3944 MD5sum: 1dc9ec917aedcce410e6db5ad451af32 SHA1: 0a221d90ca284ed6691bec84233eec7e0f9fef26 SHA256: 3dfc629fea5f4f196fae40aafc9b7238a579a16d86b166a3be2f9c235d5394c9 Section: libs Priority: optional Description: This plugin checks the status of a local Linux software RAID via the /proc/mdstat interface. Package: monitoring-plugins-mailq Source: monitoring-plugins Version: 0-0 Architecture: all Maintainer: Thomas Wagner Installed-Size: 41 Depends: perl, monitoring-plugins-common Filename: all/monitoring-plugins-mailq_0-0_all.deb Size: 8042 MD5sum: 71fbe8af68cdccf10e5f7c754e5ef6a7 SHA1: 6a3012d711ad9a81bcdaf5a6a7c464511ec2aba1 SHA256: 42327542e5099777bd0fb503c278bd18d908f2bd5556cc9a432a036053f3309e Section: libs Priority: optional Description: Checks the mail queue length via mailq/qmail-qstat, autodetecting or selecting sendmail, postfix, qmail, exim or nullmailer. Package: monitoring-plugins-mem Source: monitoring-plugins Version: 0-0 Architecture: all Maintainer: Thomas Wagner Installed-Size: 16 Depends: procps, gawk Filename: all/monitoring-plugins-mem_0-0_all.deb Size: 3440 MD5sum: a7a93873131e86afd8dc3ae553418f09 SHA1: 730b435f1412c0ac63691336afa0d142c7f024e6 SHA256: 9bb740c2bb49854939a1527cce5895bd9e591c54647c961a7a390c1ef1d83d40 Section: libs Priority: optional Description: Uses command free to get free (buffered or unused) memory. Package: monitoring-plugins-mqtt Version: 5.1+git20260211.003f5cf-1 Architecture: all Maintainer: Thomas Wagner Installed-Size: 32 Depends: python3, python3-paho-mqtt (>= 2) Suggests: python3-jsonpath-rw Filename: all/monitoring-plugins-mqtt_5.1+git20260211.003f5cf-1_all.deb Size: 10532 MD5sum: 5504be2eab1156d1943bc34cba2bebc0 SHA1: faf274efd0341254c61d0af1c55186869e0408a6 SHA256: 04c06f0ae94dad4538725d753a21e42719a7d62f95b0509db54942862b2f6ff4 Section: net Priority: optional Homepage: https://github.com/jpmens/check-mqtt Description: Nagios/Icinga plugin to check a value published on a MQTT broker Subscribes to a topic on a MQTT broker, optionally after publishing to it, and checks that the payload arrives in time and matches given criteria: a value compared with an operator, or a Python expression for warning and critical. The round trip time is reported as performance data. Supports TLS, authentication and MQTT 3.1, 3.1.1 and 5. JSON payloads can be queried with a JSONPath expression when jsonpath-rw is installed. Package: monitoring-plugins-mqtt-topic-age Version: 0.2.1-1 Architecture: all Maintainer: Thomas Wagner Installed-Size: 89 Depends: systemd | systemd-standalone-sysusers | systemd-sysusers, python3-paho-mqtt, python3:any Suggests: bash-completion Filename: all/monitoring-plugins-mqtt-topic-age_0.2.1-1_all.deb Size: 20488 MD5sum: 4a709e63ee05626d032a85c4b05b589b SHA1: 4c3d98dd765ed521789cc125edc7e697da0589c0 SHA256: 583e12b8ea1d578fb17ad4433aaadca79d0ece9046b3686ad99df20e9d68ce57 Section: net Priority: optional Homepage: https://github.com/Aikhjarto/check_mqtt_topic_age Description: Nagios/Icinga plugin to check when messages last arrived on MQTT topics Checks when messages last arrived on MQTT topics, or how many arrived recently. mqtt_message_timestamp_logger, a daemon that runs as a systemd service, subscribes to the topics and records the arrival times in an SQLite database, which check_mqtt_topic_age reads; so the check needs no connection to the broker and cannot miss a message published between two checks. . Topic filters may use the MQTT wildcards, and every topic is checked on its own, so one live sensor cannot hide a dead one. Package: monitoring-plugins-nextcloud Version: 0.4.1-1 Architecture: all Maintainer: Thomas Wagner Installed-Size: 41 Depends: python3 (>= 3.7) Suggests: bash-completion Filename: all/monitoring-plugins-nextcloud_0.4.1-1_all.deb Size: 12192 MD5sum: 8e7fc2fd925abcc6ab5c61ee2b89e8f1 SHA1: e47a8dcc50d60003336327df6d5f7bfbace72703 SHA256: 7253e2cee01a820742f1f87d991ea4714f4ec11d3e0b365afb685781b729b78a Section: net Priority: optional Homepage: https://github.com/Aikhjarto/check_nextcloud Description: Nagios/Icinga plugin to check a Nextcloud instance Nagios/Icinga plugin for Nextcloud, written in Python 3 with the standard library only. The health mode reads the unauthenticated status.php, every other mode reads the REST API of the serverinfo app. . Modes: * health: is the instance installed, out of maintenance mode and answering * cpu: the load average of the server * memory: the RAM and swap usage of the server * freespace: the free space of the data directory * storage: files, users, storages and database size * users: the number of recently active users * apps: the number of apps with an available update * rotate: replaces the app password, run from cron (not a check) . Thresholds follow the monitoring plugins range syntax and the plugin prints performance data for every mode. Package: monitoring-plugins-nfs-health Source: monitoring-plugins Version: 0-0 Architecture: all Maintainer: Thomas Wagner Installed-Size: 27 Depends: gawk, bc Filename: all/monitoring-plugins-nfs-health_0-0_all.deb Size: 5894 MD5sum: 99be10e315ef79c92882b1cedffd6299 SHA1: 84bca7e719dbfc53b023e211d35bf684985af2c6 SHA256: 5087a03e138dd2c9e278b564c7bbb468b9e9e67ba0b43cc7c4df8fdc8c5776a1 Section: libs Priority: optional Description: Checks status and health of a nfs server. Package: monitoring-plugins-ntrip-caster Version: 0.2-1 Architecture: all Maintainer: Thomas Wagner Installed-Size: 39 Depends: python3 (>= 3.7) Suggests: bash-completion Filename: all/monitoring-plugins-ntrip-caster_0.2-1_all.deb Size: 11016 MD5sum: be271c52a36636ed1370a5d854100677 SHA1: 3fdbdb209fe3f2e4e597498a446348f0c0b3c632 SHA256: 1bd6b1969356a6ccaa76c32567abfa0eb61fcdc6881ed01d3137fa17bcbabbcb Section: net Priority: optional Homepage: https://github.com/ThomasWagnerJKU/check_ntrip_caster Description: Nagios/Icinga plugin to check NTRIP casters Nagios/Icinga plugin that checks whether an NTRIP caster serves current GNSS correction data, written in Python 3 with the standard library only. . Modes: * sourcetable: complete sourcetable, caster clock and a listed mountpoint * stream: valid RTCM3 data and the age of the newest observation epoch . The stream mode decodes the observation epochs of GPS, GLONASS, Galileo, BeiDou, QZSS, SBAS and NavIC messages and compares them with the local clock. Package: monitoring-plugins-ntrip-clients Version: 0.1-1 Architecture: all Maintainer: Thomas Wagner Installed-Size: 23 Depends: bash, gawk | mawk, iproute2, sudo Filename: all/monitoring-plugins-ntrip-clients_0.1-1_all.deb Size: 6808 MD5sum: dcd3b3e2e42674a7b982819adee85533 SHA1: d394f0326086820e6ada0ccb435324565c6a7c65 SHA256: 78747c9ed20828322e7a6480d41b619732dd29e9ad3556e48ba7edce88b80258 Section: net Priority: optional Homepage: https://github.com/ThomasWagnerJKU/check_ntrip_clients Description: Nagios/Icinga plugin to check the clients of a local NTRIP caster Checks how many clients are connected to a local NTRIP caster, e.g. RTKLIB str2str with an ntripc:// output as used by RTKBase. str2str accepts at most 32 clients and never times out clients that send no valid request, so scanners can take all slots while the service keeps running. . It reports the accepted clients, the stale clients and the connections waiting in the listen queue. The plugin needs root or the caster's user; a sudoers snippet for the user nagios is included. Package: monitoring-plugins-nvidia-smi-temperature Version: 0.2-1 Architecture: all Maintainer: Thomas Wagner Installed-Size: 20 Suggests: bash-completion Filename: all/monitoring-plugins-nvidia-smi-temperature_0.2-1_all.deb Size: 4112 MD5sum: 8c94bb762af49ccd8c0afdfe87223015 SHA1: 0a9170dd64b600764b31dc87cbbb45fef3651b9a SHA256: 0ee5b0580a03d31f6755dae9f02359d5310d04d0a6f432c7c6a4283e86bacba0 Section: net Priority: optional Homepage: https://github.com/ThomasWagnerJKU/check_nvidia_smi_temperature Description: Checks NVIDIA GPU temperatures via nvidia-smi Uses nvidia-smi to check the temperature of one or more NVIDIA GPUs. Requires the proprietary NVIDIA driver (providing nvidia-smi) to be installed separately, as it is not available from this repository. Package: monitoring-plugins-openvpn Source: monitoring-plugins Version: 0-0 Architecture: all Maintainer: Thomas Wagner Installed-Size: 25 Depends: python3 Filename: all/monitoring-plugins-openvpn_0-0_all.deb Size: 5444 MD5sum: 2df53e3dd8122c426530a6b0ee476b6f SHA1: b2295f61b21b1733972703789fdf1410fb84a0e0 SHA256: c16a79d11762c8cc552c9055cffa0936e5adfe5c38b3138a2a4d7b67097205db Section: libs Priority: optional Description: Check if an OpenVPN server runs on a given UDP or TCP port. Package: monitoring-plugins-part-db Version: 0.3-1 Architecture: all Maintainer: Thomas Wagner Installed-Size: 63 Depends: python3 (>= 3.7) Suggests: bash-completion Filename: all/monitoring-plugins-part-db_0.3-1_all.deb Size: 19624 MD5sum: e82c0f8aa7227ab13c69d42daf593bc3 SHA1: 804b2cfbbbd13775c1634cdb17e05519cf5157bc SHA256: f0183b85889a6e6375bbd6b17ec0072cedb2176f627a15013450898edeb56591 Section: net Priority: optional Homepage: https://github.com/ThomasWagnerJKU/check_part-db Description: Nagios/Icinga plugin to check a Part-DB instance Nagios/Icinga plugin for Part-DB (https://github.com/Part-DB/Part-DB-server), usable with Nagios, Naemon, Icinga and anything else speaking the monitoring plugins API. It queries the Part-DB REST API and, for the frontend check, its web UI, so the monitoring host needs only network access and an API token. . Modes of check_part-db: * health: API reachability, token validity, database answer * web: web frontend response and TLS certificate expiry * stats: counts of parts, categories, footprints, suppliers * stock: parts below their configured minimum amount * token: days until the API token expires, CRITICAL below 30 . Only the Python 3 standard library is used. Package: monitoring-plugins-podman Version: 0.2-1 Architecture: all Maintainer: Thomas Wagner Installed-Size: 31 Depends: python3 (>= 3.7), sudo Recommends: podman Suggests: bash-completion Filename: all/monitoring-plugins-podman_0.2-1_all.deb Size: 9244 MD5sum: 4b8d639064712e90d57164a658219e6c SHA1: 6c263d3c88b19b9d70812a2d227b34109a67efcc SHA256: 7fb10fd034c5e80aeb663e695492149bc4381cacada83f765b4f30fc63852177 Section: net Priority: optional Homepage: https://github.com/ThomasWagnerJKU/check_podman Description: Nagios/Icinga plugin to check the containers of a rootless podman user Nagios/Icinga plugin that checks the containers of a rootless podman user via sudo, written in Python 3 with the standard library only. . It checks that every container is running, reports CPU, memory, network and block I/O usage of each as performance data, and alerts when a container gets close to its memory limit. It needs a NOPASSWD sudoers rule for "podman ps" and "podman stats" as the rootless user, and lingering for that user; see the README. Package: monitoring-plugins-postfix-queue Source: monitoring-plugins Version: 0-0 Architecture: all Maintainer: Thomas Wagner Installed-Size: 16 Depends: postfix Filename: all/monitoring-plugins-postfix-queue_0-0_all.deb Size: 3510 MD5sum: 82fbf138a8689d402514bad83cc9e09d SHA1: 4a2451817766527b270e07ec73e3e5470628f641 SHA256: 7b1b9ec42f980f70360c919b77ce5b96e8331af8aa9dc08085ed6d05ef255ba5 Section: libs Priority: optional Description: Uses mailq to check the length of the queue of postfix. Package: monitoring-plugins-printer-php Source: monitoring-plugins Version: 0-0 Architecture: all Maintainer: Thomas Wagner Installed-Size: 40 Depends: php-cli, php-snmp Filename: all/monitoring-plugins-printer-php_0-0_all.deb Size: 7678 MD5sum: a754edb5b268b2afc0167bc2a52feed2 SHA1: 910a0b41c268ce45a390028933b72433486ac9c7 SHA256: e9613690979f2da463822289a501f4f7796af1f4912c94a29f8b81ffbb9b302b Section: libs Priority: optional Description: Advanced printer check supporting multiple vendors (HP, Kyocera, Ricoh, Nec, Lexmark, NRG) via SNMP. Reads paper tray status, toner/ink levels, hardware part status, internal page counters and alert status. Named check_printer.php (not check_printer) since Debian's monitoring-plugins-contrib package already ships its own, different, check_printer. Package: monitoring-plugins-proxy Source: monitoring-plugins Version: 0-0 Architecture: all Maintainer: Thomas Wagner Installed-Size: 19 Depends: wget, bc, gawk Filename: all/monitoring-plugins-proxy_0-0_all.deb Size: 4484 MD5sum: cf47c5d07842deb53dec62208c1ffe30 SHA1: 05a0db59bc836333f91d067d1ad248a1b40ca4f1 SHA256: 6feb2a42a0e87adbed0a3f94b104f28d509a3630c46254b496029b7b7336c5af Section: libs Priority: optional Description: Uses wget to obtain a file directly and through a proxy. Then it compares if the files are identical. Caution: lot's of websites include the time in their source code. These will be always different. Package: monitoring-plugins-raspberry-voltage Source: monitoring-plugins Version: 0-0 Architecture: all Maintainer: Thomas Wagner Installed-Size: 17 Filename: all/monitoring-plugins-raspberry-voltage_0-0_all.deb Size: 3814 MD5sum: 51144b7ec391f687262d52e73207f13d SHA1: 70e00c12780646a51e3b7bf5601781b1dc1e27b6 SHA256: 594ef2bdd5f93850283cfa523aedb09993ab679c05107cd8f86c5d9f4ee9e37c Section: libs Priority: optional Description: Uses vcgencmd to report the core, sdram_c, sdram_i and sdram_p voltage rails as performance data, and checks vcgencmd get_throttled for under-voltage of the power supply. Requires vcgencmd (provided by Raspberry Pi OS's userland tools) to be installed separately, as it is not available from this repository. Package: monitoring-plugins-remote-load Version: 0.2-1 Architecture: all Maintainer: Thomas Wagner Installed-Size: 20 Depends: bc, openssh-client Suggests: bash-completion Filename: all/monitoring-plugins-remote-load_0.2-1_all.deb Size: 4010 MD5sum: 2211113c512a74faff3aebd416f67cc1 SHA1: 05ae86bf9647be5dbc6496c4c39aacf593f576dc SHA256: 0a05bef55c030712d1086994bb07049576c46fcffa3ee26aa27e9b761449882c Section: net Priority: optional Homepage: https://github.com/Aikhjarto/check_remote_load Description: Check /proc/loadavg via ssh Connects via ssh to a remote machine, reads /proc/loadavg, and checks the 1 m, 5 m and 15 m averages. Package: monitoring-plugins-reprise-server Version: 0.2-1 Architecture: all Maintainer: Thomas Wagner Installed-Size: 33 Depends: python3 (>= 3.7) Recommends: openssh-client Suggests: bash-completion Filename: all/monitoring-plugins-reprise-server_0.2-1_all.deb Size: 9626 MD5sum: fa4141f8908609bf63bc94f2966eddde SHA1: 7fefbd1dab1c4e18a150aa4dd46b1306bc1d08a8 SHA256: 8d47c6d60e7c925a6368be324e7f55e2b445ba5af0f0fd5094ae0ea584a8b2be Section: net Priority: optional Homepage: https://github.com/ThomasWagnerJKU/check_reprise_server Description: Nagios/Icinga plugin to check Reprise License Manager servers Nagios/Icinga plugin that checks a Reprise License Manager (RLM) server with rlmutil, written in Python 3 with the standard library only. . It checks that the rlm server and its ISV servers are up, reports the usage of every product as performance data, and alerts on the days until the earliest expiry of any product. rlmutil is not included; it comes with the licensed software, and --ssh runs it on the license server. Package: monitoring-plugins-sensor Source: monitoring-plugins Version: 0-0 Architecture: all Maintainer: Thomas Wagner Installed-Size: 22 Depends: lm-sensors, bash, jq Filename: all/monitoring-plugins-sensor_0-0_all.deb Size: 4706 MD5sum: 4a6cb1bd980ec7ad2fa627cb8374d1f7 SHA1: 0e02c5716e828270337882d6f09c81e0b0e68219 SHA256: 968c865b51dfa81d004e76d925d17b1f859988af02b6f17cb7e3535b1e6630b0 Section: libs Priority: optional Description: Uses sensors package to read hardware information like fan RPMs or temperatures. Package: monitoring-plugins-smb Source: monitoring-plugins Version: 0-0 Architecture: all Maintainer: Thomas Wagner Installed-Size: 16 Depends: smbclient, monitoring-plugins-common Filename: all/monitoring-plugins-smb_0-0_all.deb Size: 3232 MD5sum: dd13a3a2535213fa43a84ad5b8608f29 SHA1: 0116768ae0a1297971257536cb4a0021ecddcead SHA256: 9beb497d361a811b2bd8092a28ecc071504a90b9118836eee2dc1401ce1e322e Section: libs Priority: optional Description: Uses smbclient to connect anonymously to a samba server. Package: monitoring-plugins-snmp-printer-supply Source: monitoring-plugins-snmp-printer Version: 0.3-1 Architecture: all Maintainer: Thomas Wagner Installed-Size: 27 Depends: snmp Suggests: bash-completion Filename: all/monitoring-plugins-snmp-printer-supply_0.3-1_all.deb Size: 5286 MD5sum: c47821dc9ee78362400378786e6e178d SHA1: a3004939cca7327f310f9c845217d08f80d23c82 SHA256: 3d06270511b7b5b8ff110309419dfb78219f5660e44f9c91c71cf24786af099a Section: net Priority: optional Homepage: https://github.com/Aikhjarto/check_snmp_printer Description: Checks the supplies and trays of a printer via SNMP Uses snmpwalk to connect to a printer and check its supplies and the paper level of its trays. Package: monitoring-plugins-ssh-date Source: monitoring-plugins Version: 0-0 Architecture: all Maintainer: Thomas Wagner Installed-Size: 16 Depends: python3, openssh-client Filename: all/monitoring-plugins-ssh-date_0-0_all.deb Size: 3460 MD5sum: 1b5c6b3b1d8a650b9e3653a0d6b35657 SHA1: b1d0a68b9876e8ef7534df591832826e931d76c7 SHA256: 94fa8c02ee7882b1f908d436bea13a9850eefe4984df50db5945950d44d1dfc5 Section: libs Priority: optional Description: Uses ssh to run "date -R" on a remote host and compares the result to the local date and time to detect clock drift. Package: monitoring-plugins-ssl-cert Source: monitoring-plugins Version: 0-0 Architecture: all Maintainer: Thomas Wagner Installed-Size: 292 Depends: openssl Filename: all/monitoring-plugins-ssl-cert_0-0_all.deb Size: 49698 MD5sum: cbf462ec46b855311428e20f2f943fa0 SHA1: 101d5c1b977eda8fd0bb4839e3af6e044db72a7f SHA256: c0fc24b9fda6cff0fc0a8b1c757d1d11a48166b21918c3f62eaacdc8142a38b7 Section: libs Priority: optional Description: Uses openssl to check validity, expiration and other properties of X.509 certificates. See https://github.com/matteocorti/check_ssl_cert. Package: monitoring-plugins-stun-turn Version: 0.2.1-1 Architecture: all Maintainer: Thomas Wagner Installed-Size: 41 Depends: python3 (>= 3.7) Suggests: bash-completion Filename: all/monitoring-plugins-stun-turn_0.2.1-1_all.deb Size: 11414 MD5sum: 57245e3afe80797428797c716704c908 SHA1: 95116b20598678c9c4e395e86528568b35c2769c SHA256: aed80f4fe8876fedcbd4038760f97b64f8a640bfa8d9365e0a9a8eed1fa7b50b Section: net Priority: optional Homepage: https://github.com/Aikhjarto/check_stun_turn Description: Nagios/Icinga plugin to check STUN/TURN servers Nagios/Icinga plugin for STUN/TURN servers such as coturn, written in Python 3 with the standard library only. . Modes: * stun: binding request, mapped address and response time * turn: authentication challenge, or with credentials (long-term or the shared secret of the TURN REST API) a relay allocation that is released again . Both modes work over UDP, TCP and TLS and check the TLS certificate. Package: monitoring-plugins-systemd Version: 5.0.0-0 Architecture: all Maintainer: Debian Python Team Installed-Size: 83 Depends: python3 (>= 3.9), python3-nagiosplugin, systemd, default-dbus-system-bus | dbus-system-bus Suggests: python3-gi Filename: all/monitoring-plugins-systemd_5.0.0-0_all.deb Size: 18352 MD5sum: 1f0a0843e9f0f1d8e9a8ead2f41a2d46 SHA1: 35a44c2714b4be054d7148cd47c724e39029f625 SHA256: 28e2aa66ae0fc300262cd60569cc36b48e7c70c39e07cffc50960bb11c91006c Section: net Priority: optional Homepage: https://github.com/Josef-Friedrich/check_systemd Description: systemd plugin for nagios compatible monitoring systems This systemd check for nagios compatible monitoring systems will report a degraded systemd to your monitoring solution. It can also be used to monitor individual systemd services and timers units. Package: monitoring-plugins-systemd-service Source: monitoring-plugins Version: 0-0 Architecture: all Maintainer: Thomas Wagner Installed-Size: 16 Filename: all/monitoring-plugins-systemd-service_0-0_all.deb Size: 3420 MD5sum: 6cbac6d1954ffb91c30665ae8f59c4a9 SHA1: d7e79fbebf41d990407b3f94a8c8b7a4f5724432 SHA256: 0520603db58b79ec3ddf4c74f6066f0dff907abb3c9cd0607873fa8d2dbcdb08 Section: libs Priority: optional Description: For a *.service it checks if it is prestent, enabled and alive. Extension for openSUSE: also check is a mountpoint is active. Package: monitoring-plugins-systemd-sh Version: 0.3-1 Architecture: all Maintainer: Thomas Wagner Installed-Size: 25 Depends: openssh-client, systemd Suggests: bash-completion Filename: all/monitoring-plugins-systemd-sh_0.3-1_all.deb Size: 5686 MD5sum: 4de075628f98a3db2c60c84ca4c43d71 SHA1: 682d2f7a8122f6ffada2173a3384e42f784f58ba SHA256: 71eac7676485dfcf0ae907ba6d62050d4c75beb4580bbe21cd3671cb3fa4ed03 Section: net Priority: optional Homepage: https://github.com/Aikhjarto/check_systemd.sh Description: Nagios/Icinga plugin to check failed systemd units and the boot time Checks systemd on a local or remote machine via systemctl: the boot time, failed units, and services that have to be running. Package: monitoring-plugins-tasmota-sensor Version: 0.3.1-1 Architecture: all Maintainer: Thomas Wagner Installed-Size: 42 Depends: python3 (>= 3.8), python3-requests Suggests: bash-completion Filename: all/monitoring-plugins-tasmota-sensor_0.3.1-1_all.deb Size: 12188 MD5sum: 27a569a5f4fe34f83acffdab4bae8ca4 SHA1: b0ec803bf582dd17e42102a6eb56bd067422a8f9 SHA256: 0d66cbb3b567fcc0aa71f66cb3cfae149ea79a6b253b607759b9824687457d64 Section: net Priority: optional Homepage: https://github.com/Aikhjarto/check_tasmota_sensor Description: Checks Tasmota devices via the HTTP command API Checks Tasmota devices via the HTTP command API (/cm?cmnd=...). Supports checking a numeric sensor value against thresholds (-c may be smaller than -w), the time offset of the device's own reported time against the local clock or an NTP server, a boolean expression over POWER-style relay states, and a regular expression match against a sensor field's value. Package: monitoring-plugins-tftp Source: monitoring-plugins Version: 0-0 Architecture: all Maintainer: Thomas Wagner Installed-Size: 16 Depends: tftp Filename: all/monitoring-plugins-tftp_0-0_all.deb Size: 3302 MD5sum: a319dbdecddbc3320d47d24d6385864d SHA1: 05971ecad0f8167f7f04690ae12fff1d64284852 SHA256: 01313b20cee7e8e342e3b9304ff188306b0cbdfe31eb27af0e640aa607fe791c Section: libs Priority: optional Description: Uses tftp to connect to a tftpd and checks if a file with a known name can be downloaded. Package: monitoring-plugins-thermal-zone0 Source: monitoring-plugins Version: 0-0 Architecture: all Maintainer: Thomas Wagner Installed-Size: 16 Filename: all/monitoring-plugins-thermal-zone0_0-0_all.deb Size: 3446 MD5sum: 0ce40f86e5f6210494a4dcd1c9c81427 SHA1: 12368dcfa31b56f72130e23fd1f4e2c3a68d6c6d SHA256: 2068237b5b9ee0dea9f82a856e00834452fd5299542324bfef313e1e79ff9c86 Section: libs Priority: optional Description: Reads /sys/class/thermal/thermal_zone0/temp to check the SoC/board temperature, as found on Raspberry Pi and many other ARM boards. Package: monitoring-plugins-tor-proxy Version: 0.3-1 Architecture: all Maintainer: Thomas Wagner Installed-Size: 25 Depends: curl | wget Suggests: bash-completion Filename: all/monitoring-plugins-tor-proxy_0.3-1_all.deb Size: 6294 MD5sum: 5de0ad6543646467218ca5cbe21c043d SHA1: ed57b6d2c808400b749b1880644c30cc3bd40a92 SHA256: fb20dafaed6a4250308041156f083c70b87572ce934020d2c9f16f17b0ee2fc5 Section: net Priority: optional Homepage: https://github.com/Aikhjarto/check_tor_proxy Description: Nagios/Icinga plugin to check that a proxy exits to the Tor network Nagios/Icinga plugin that checks whether a proxy exits to the Tor network, by asking the check service of the Tor Project through it. Works with SOCKS proxies such as Tor itself and HTTP proxies such as Privoxy in front of Tor, using curl or wget; SOCKS proxies need curl. Package: monitoring-plugins-ts3 Source: monitoring-plugins Version: 0-0 Architecture: all Maintainer: Thomas Wagner Installed-Size: 16 Depends: expect Filename: all/monitoring-plugins-ts3_0-0_all.deb Size: 3450 MD5sum: 56dbdb43b86f4c59f036f66b99b66d10 SHA1: 987fef5e830c7fbc80e0b38aca85a8582b60bb0a SHA256: ebb58f15fccb811bf4609489283e3dbd22982cdb429f1511084f309680070814 Section: libs Priority: optional Description: Connects to the dataport of a teamspeak server and checks for its characterstic respone. Package: monitoring-plugins-vdr-diskusage Source: monitoring-plugins Version: 0-0 Architecture: all Maintainer: Thomas Wagner Installed-Size: 17 Depends: vdr, gawk Filename: all/monitoring-plugins-vdr-diskusage_0-0_all.deb Size: 3830 MD5sum: 47462fc4411f20679a894d7148982a0e SHA1: 61349d0c0f21cfab493a0a140f8bf8799869da91 SHA256: 03aced9c8aa3fc27097c251f71a7e7874930c899b6ea60f75beef9f029dd8e60 Section: libs Priority: optional Description: Uses svdrpsend to check disk utilization of VDR. Package: monitoring-plugins-vdr-signalstrength Source: monitoring-plugins Version: 0-0 Architecture: all Maintainer: Thomas Wagner Installed-Size: 17 Depends: vdr, vdr-plugin-femon Filename: all/monitoring-plugins-vdr-signalstrength_0-0_all.deb Size: 4058 MD5sum: 1c44030d189463478182a31e9134a72d SHA1: 408d6fcb5339ba9a8f1aaa57445a414677482dcf SHA256: 50c4ef097335e6e33ea2c76706a1a35d14ad1c743a93c8735d944378fc7cde5b Section: libs Priority: optional Description: Uses svdrpsend to connect to a VDR using the femon plugin. Package: monitoring-plugins-zyxel-hw-monitor Version: 0.2-1 Architecture: all Maintainer: Thomas Wagner Installed-Size: 68 Depends: snmp, gawk | mawk Recommends: python3 Suggests: bash-completion Filename: all/monitoring-plugins-zyxel-hw-monitor_0.2-1_all.deb Size: 9170 MD5sum: 0e9412336f0b167cb0e43734516cc1fd SHA1: 432de0b47b9c76d5dc655b8c758dc52a27f1e8b2 SHA256: a5693e2dcafb1fb9545a8ec5ad14e7026f25ad3be8fc2f150bc932d6dda8f28a Section: net Priority: optional Homepage: https://github.com/ThomasWagnerJKU/check_zyxel_hw_monitor Description: Nagios/Icinga plugins to check Zyxel devices via SNMP Plugins for monitoring Zyxel devices via SNMP, based on the ZYXEL-HW-MONITOR-MIB and ZYXEL-ES-COMMON MIBs. They are compatible with Nagios, Icinga and other monitoring systems supporting Nagios plugins. . Included checks: * check_zyxel-cpu: CPU usage (%) * check_zyxel-mem: memory usage (%) * check_zyxel-flash: flash usage (%) * check_zyxel-fan: fan RPM (indexed sensor) * check_zyxel-temperature: temperature (indexed sensor) * check_zyxel-voltage: voltage (indexed sensor) * check_zyxel-power: power source status (indexed source) * check_zyxel-time: switch time skew against an NTP server or local time . All plugins use numeric OIDs, so no MIB files are needed on the monitoring host. SNMPv2c and SNMPv3 are supported. Package: mqtt2logger Version: 0.2.1-1 Architecture: all Maintainer: Thomas Wagner Installed-Size: 65 Depends: systemd | systemd-standalone-sysusers | systemd-sysusers, python3 (>= 3.7), python3-paho-mqtt, python3-yaml Suggests: bash-completion Filename: all/mqtt2logger_0.2.1-1_all.deb Size: 15836 MD5sum: d673765c71a5aac20d74582f27921a0e SHA1: efbc2aa2b6eb3c885452cb45df96d94f627452e2 SHA256: 075a9c8679966b53863b4403a847021139c4d2a396e92a571a364bcc151009d0 Section: admin Priority: optional Homepage: https://github.com/Aikhjarto/mqtt2logger Description: Forward the MQTT logs of ESPHome and Tasmota devices to rsyslog and journald Subscribes to the log topics of ESPHome and Tasmota devices on an MQTT broker and forwards each log line to rsyslog (RFC 5424, with the device as host name) and to systemd-journald, each configurable. Severity and time stamp are taken from the messages where they contain them. A persistent MQTT session lets the broker keep QoS 1 messages while the daemon is down, and queues keep messages while rsyslog or journald are unavailable. The systemd service runs as the user mqtt2logger and is not enabled by default. Package: purge-postfix-mails Version: 0.4-1 Architecture: all Maintainer: Thomas Wagner Installed-Size: 24 Depends: jq (>= 1.6), postfix (>= 3.1) Suggests: bash-completion Filename: all/purge-postfix-mails_0.4-1_all.deb Size: 4934 MD5sum: 55cdfd54f1d8f7b6f0d2ac5bf456408d SHA1: 23de33c5ade0eabc00aae8efae7dd09461808e40 SHA256: 96137eefe1edd1a7f106944f90b209dfbcc972f8fba8c9108fbb6096fa7b6f2d Section: mail Priority: optional Homepage: https://github.com/Aikhjarto/purge_postfix_mails Description: Scripts to break a mail loop by purging undeliverable mails from Postfix Scripts that break a mail loop in Postfix, as caused by a machine mailing its admin about every logged error while the relayhost is unreachable, by deleting the queued mails that cannot be delivered: * purge_postfix_mailer_daemon.sh deletes bounces, mails to postmaster@myorigin and queued mails that mention postmaster or MAILER-DAEMON of myorigin * purge_postfix_mails.sh additionally deletes deferred mails the relayhost refused * purge_postfix_per_recipient.sh deletes the mails to given recipients * purge_postfix_per_sender.sh deletes the mails from given senders Package: rsyslog-maillog Version: 0.1-1 Architecture: all Maintainer: Thomas Wagner Installed-Size: 33 Depends: rsyslog Filename: all/rsyslog-maillog_0.1-1_all.deb Size: 7102 MD5sum: 7c897880fa623a6316d2c1b307ee557e SHA1: cc8954c026670ef51bfd940c6db5d9bdffee2107 SHA256: a5bc5e1054d31b0f3ddbba5c1d97cf7168741ab1fc66117e09f2576c7d48d6cd Section: admin Priority: optional Homepage: https://github.com/Aihjarto/rsyslog-maillog Description: This project provides a config for forwarding important log lines in rsyslog via postfix. Package: vm-boot-order-2 Version: 0.3.1-1 Architecture: all Maintainer: Thomas Wagner Installed-Size: 43 Depends: python3 (>= 3.7), python3-libvirt Recommends: sysstat Suggests: bash-completion Filename: all/vm-boot-order-2_0.3.1-1_all.deb Size: 11660 MD5sum: 9f00473a94fbd7587462117bdffba804 SHA1: 264e0b507065e76f07d97f57fedc4257b321a388 SHA256: 1a6ca62b4687a485220b70334c21301c9e94288ecd5928bae5e2190781d43fdf Section: admin Priority: optional Homepage: https://github.com/Aikhjarto/vm-boot-order-2 Description: Start libvirt VMs in order at boot and shut them down in parallel Starts libvirt VMs one after another in a configured order at boot, and shuts them down in parallel at system shutdown. After starting a VM, it waits up to a configured time, or until the I/O load of a configured disk drops, before starting the next one. At shutdown, VMs that do not stop within a timeout are powered off. . The service is installed but not enabled. Configure the VMs in /etc/vm-boot-order-2.conf, check it with "vm-boot-order-2.py status", and disable libvirt autostart for those VMs.