NAME Data::ModeMerge - Merge two nested data structures, with merging modes and options VERSION version 0.21 SYNOPSIS use Data::ModeMerge; my $hash1 = { a=>1, c=>1, d=>{ da =>[1]} }; my $hash2 = { a=>2, "-c"=>2, d=>{"+da"=>[2]} }; # if you want Data::ModeMerge to behave like many other merging # modules (e.g. Hash::Merge or Data::Merger), turn off modes # (prefix) parsing and options key parsing. my $mm = new Data::ModeMerge(config => {parse_prefix=>0, options_key=>undef}); my $res = $mm->merge($hash1, $hash2); die $res->{error} if $res->{error}; # $res->{result} -> { a=>2, c=>1, "-c"=>2, d=>{da=>[1], "+da"=>[2]} } # otherwise Data::ModeMerge will parse prefix as well as options # key my $res = $mm->merge($hash1, $hash2); die $res->{error} if $res->{error}; # $res->{result} -> { a=>2, c=>-1, d=>{da=>[1,2]} } $res = $merge({ a =>1, { a2 =>1, ""=>{parse_prefix=>0}}, {".a"=>2, {".a2"=>2 }}); # $res->{result} -> { a=>12, {a2=>1, ".a2"=>2} }, parse_prefix is turned off in just the subhash # procedural interface my $res = mode_merge($hash1, $hash2, {allow_destroy_hash=>0}); DESCRIPTION There are already several modules on CPAN to do recursive data structure merging, like Data::Merger and Hash::Merge. "Data::ModeMerge" differs in that it offers merging "modes" and "options". It provides greater flexibility on what the result of a merge between two data should/can be. This module may or may not be what you need. One application of this module is in handling configuration. Often there are multiple levels of configuration, e.g. in your typical Unix command-line program there are system-wide config file in /etc, per-user config file under ~/, and command-line options. It's convenient programatically to load each of those in a hash and then merge system-wide hash with the per-user hash, and then merge the result with the command-line hash to get the a single hash as the final configuration. Your program can from there on deal with this just one hash instead of three. In a typical merging process between two hashes (left-side and right-side), when there is a conflicting key, then the right-side key will override the left-side. This is usually the desired behaviour in our said program as the system-wide config is there to provide defaults, and the per-user config (and the command-line arguments) allow a user to override those defaults. But suppose that the user wants to *unset* a certain configuration setting that is defined by the system-wide config? She can't do that unless she edits the system-wide config (in which she might need admin rights), or the program allows the user to disregard the system-wide config. The latter is usually what's implemented by many Unix programs, e.g. the "-noconfig" command-line option in "mplayer". But this has two drawbacks: a slightly added complexity in the program (need to provide a special, extra comand-line option) and the user loses all the default settings in the system-wide config. What she needed in the first place was to just unset *a single setting* (a single key-value pair of the hash). Data::ModeMerge comes to the rescue. It provides a so-called "DELETE mode". mode_merge({foo=>1, bar=>2}, {"!foo"=>undef, bar=>3, baz=>1}); will result ini: {bar=>3, baz=>1} The "!" prefix tells Data::ModeMerge to do a DELETE mode merging. So the final result will lack the "foo" key. On the other hand, what if the system admin wants to *protect* a certain configuration setting from being overriden by the user or the command-line? This is useful in a hosting or other retrictive environment where we want to limit users' freedom to some levels. This is possible via the KEEP mode merging. mode_merge({"^bar"=>2, "^baz"=>1}, {bar=>3, "!baz"=>0, quux=>7}); will result in: {"^bar"=>2, "^baz"=>1, quux=>7} effectively protecting "bar" and "baz" from being overriden/deleted/etc. Aside from the two mentioned modes, there are also a few others available by default: ADD (prefix "+"), CONCAT (prefix "."), SUBTRACT (prefix "-"), as well as the plain ol' NORMAL/override (optional prefix "*"). You can add other modes by writing a mode handler module. You can change the default prefixes for each mode if you want. You can disable each mode individually. You can default to always using a certain mode, like the NORMAL mode, and ignore all the prefixes, in which case Data::ModeMerge will behave like most other merge modules. There are a few other options like whether or not the right side is allowed a "change the structure" of the left side (e.g. replacing a scalar with an array/hash, destroying an existing array/hash with scalar), maximum length of scalar/array/hash, etc. You can change default mode, prefixes, disable/enable modes, etc on a per-hash basis using the so-called options key. See the OPTIONS KEY section for more details. This module can handle (though not all possible cases) circular/recursive references. MERGING PREFIXES AND YOUR DATA Merging with this module means you need to be careful when your hash keys might contain one of the mode prefixes characters by accident, because it will trigger the wrong merge mode and moreover the prefix characters will be stripped from the final result (unless you configure the module not to do so). A rather common case is when you have regexes in your hash keys. Regexes often begins with "^", which coincidentally is a prefix for the KEEP mode. Or perhaps you have dot filenames as hash keys, where it clashes with the CONCAT mode. Or perhaps shell wildcards, where "*" is also used as the prefix for NORMAL mode. To avoid clashes, you can either: * exclude the keys using "exclude_merge"/"include_merge"/"exclude_parse"/"include_parse" config settings * turn off some modes which you don't want via the "disable_modes" config * change the prefix for that mode so that it doesn't clash with your data via the "set_prefix" config * disable prefix parsing altogether via setting "parse_prefix" config to 0 You can do this via the configuration, or on a per-hash basis, using the options key. See Data::ModeMerge::Config for more details on configuration. OPTIONS KEY Aside from merging mode prefixes, you also need to watch out if your hash contains a "" (empty string) key, because by default this is the default key used for options key. Options key are used to specify configuration on a per-hash basis. If your hash keys might contain "" keys which are not meant to be an options key, you can either: * change the name of the key for options key, via setting "options_key" config to another string. * turn off options key mechanism, by setting "options_key" config to undef. See Data::ModeMerge::Config for more details about options key. MERGING MODES NORMAL (optional '*' prefix on left/right side) mode_merge({ a =>11, b=>12}, { b =>22, c=>23}); # {a=>11, b=>22, c=>23} mode_merge({"*a"=>11, b=>12}, {"*b"=>22, c=>23}); # {a=>11, b=>22, c=>23} ADD ('+' prefix on the right side) mode_merge({i=>3}, {"+i"=>4, "+j"=>1}); # {i=>7, j=>1} mode_merge({a=>[1]}, {"+a"=>[2, 3]}); # {a=>[1, 2, 3]} Additive merge on hashes will be treated like a normal merge. CONCAT ('.' prefix on the right side) mode_merge({i=>3}, {".i"=>4, ".j"=>1}); # {i=>34, j=>1} Concative merge on arrays will be treated like additive merge. SUBTRACT ('-' prefix on the right side) mode_merge({i=>3}, {"-i"=>4}); # {i=>-1} mode_merge({a=>["a","b","c"]}, {"-a"=>["b"]}); # {a=>["a","c"]} Subtractive merge on hashes behaves like a normal merge, except that each key on the right-side hash without any prefix will be assumed to have a DELETE prefix, i.e.: mode_merge({h=>{a=>1, b=>1}}, {-h=>{a=>2, "+b"=>2, c=>2}}) is equivalent to: mode_merge({h=>{a=>1, b=>1}}, {h=>{"!a"=>2, "+b"=>2, "!c"=>2}}) and will merge to become: {b=>3} DELETE ('!' prefix on the right side) mode_merge({x=>WHATEVER}, {"!x"=>WHATEVER}); # {} KEEP ('^' prefix on the left/right side) If you add '^' prefix on the left side, it will be protected from being replaced/deleted/etc. mode_merge({'^x'=>WHATEVER1}, {"x"=>WHATEVER2}); # {x=>WHATEVER1} For hashes, KEEP mode means that all keys on the left side will not be replaced/modified/deleted, *but* you can still add more keys from the right side hash. mode_merge({a=>1, b=>2, c=>3}, {a=>4, '^c'=>1, d=>5}, {default_mode=>'KEEP'}); # {a=>1, b=>2, c=>3, d=>5} Multiple prefixes on the right side is allowed, where the merging will be done by precedence level (highest first): mode_merge({a=>[1,2]}, {'-a'=>[1], '+a'=>[10]}); # {a=>[2,10]} but not on the left side: mode_merge({a=>1, '^a'=>2}, {a=>3}); # error! Precedence levels (from highest to lowest): KEEP NORMAL SUBTRACT CONCAT ADD DELETE FUNCTIONS mode_merge($l, $r[, $config_vars]) A non-OO wrapper for merge() method. Exported by default. See "merge" method for more details. ATTRIBUTES config A hashref for config. See Data::ModeMerge::Config. METHODS For normal use, you will normally only need to use merge(). push_error($errmsg) Used by mode handlers to push error when doing merge. End users normally should not need this. register_mode($name_or_package_or_obj) Register a mode. Will die if mode with the same name already exists. check_prefix($hash_key) Check whether hash key has prefix for certain mode. Return the name of the mode, or undef if no prefix is detected. check_prefix_on_hash($hash) This is like "check_prefix" but performed on every key of the specified hash. Return true if any of the key contain a merge prefix. add_prefix($hash_key, $mode) Return hash key with added prefix with specified mode. Log merge error if mode is unknown or is disabled. remove_prefix($hash_key) Return hash key will any prefix removed. remove_prefix_on_hash($hash) This is like "remove_prefix" but performed on every key of the specified hash. Return the same hash but with prefixes removed. save_config() Called by mode handlers to save configuration before recursive merge. This is because many configuration settings can be overriden by options key. restore_config() Called by mode handlers to restore configuration saved by save_config(). merge($l, $r) Merge two nested data structures. Returns the result hash: { success=>0|1, error=>'...', result=>..., backup=>... }. The 'error' key is set to contain an error message if there is an error. The merge result is in the 'result' key. The 'backup' key contains replaced elements from the original hash/array. CREATING AND USING YOUR OWN MODE Let's say you want to add a mode named "FOO". It will have the prefix '?'. Create the mode handler class, e.g. "Data::ModeMerge::Mode::FOO". It's probably best to subclass from Data::ModeMerge::Mode::Base. The class must implement name(), precedence_level(), default_prefix(), default_prefix_re(), and merge_{SCALAR,ARRAY,HASH}_{SCALAR,ARRAY,HASH}(). For more details, see the source code of Base.pm and one of the mode handlers (e.g. NORMAL.pm). To use the mode, register it: my $mm = Data::ModeMerge->new; $mm->register_mode('FOO'); This will require "Data::ModeMerge::Mode::FOO". After that, define the operations against other modes: # if there's FOO on the left and NORMAL on the right, what mode # should the merge be done in (FOO), and what the mode should be # after the merge? (NORMAL) $mm->combine_rules->{"FOO+NORMAL"} = ["FOO", "NORMAL"]; # we don't define FOO+ADD $mm->combine_rules->{"FOO+KEEP"} = ["KEEP", "KEEP"]; # and so on SEE ALSO Data::ModeMerge::Config Other merging modules on CPAN: Data::Merger (from Data-Utilities), Hash::Merge, Hash::Merge::Simple Data::Schema and Config::Tree (among others, two modules which use Data::ModeMerge) Data::PrefixMerge is the old name for this module. BUGS Please report any bugs or feature requests to "bug-data-modemerge at rt.cpan.org", or through the web interface at . I will be notified, and then you'll automatically be notified of progress on your bug as I make changes. SUPPORT You can find documentation for this module with the perldoc command. perldoc Data::ModeMerge You can also look for information at: * RT: CPAN's request tracker * AnnoCPAN: Annotated CPAN documentation * CPAN Ratings * Search CPAN AUTHOR Steven Haryanto COPYRIGHT AND LICENSE This software is copyright (c) 2009 by Steven Haryanto. This is free software; you can redistribute it and/or modify it under the same terms as the Perl 5 programming language system itself.