NAME Shell::Cmd - run shell commands with enhanced support SYNOPSIS use Shell::Cmd; $obj = new Shell::Cmd; DESCRIPTION A very comman use of perl is to act as a wrapper around shell commands where it is used to prepare the shell commands, execute them, and deal with the resulting output. Even where the bulk of the work is actually done in the perl script, creating small shell scripts within it to do some portion of the task is common. In the simplest form, running shell commands can be done very simply using the system() call, backticks, or several other ways, but I usually find myself wanting to do a bit (and sometimes a lot) more, especially when I am writing a long-term script that I want to be robust. In these cases, I frequently ended up writing a subroutine to run the shell command(s) for me with added functionality. This module is designed to take a list of shell commands and automatically turn them into a shell script (using only basic shell commands) which adds some common desirable functionality including: o Keeping or discarding STDOUT and STDERR (in any combination). o Echoing commands as they are run if desired. o Dry-run mode where the shell script is created and returned, but not actually run. o Error trapping and handling at a per-command level even though all of the commands are run in a single shell. o Setting up environment variables for the commands. o Alternate commands that do the same thing so that you can run the scripts more easily on multiple platforms. o Running the commands locally, or via. ssh on a remote host (or hosts). o When running via ssh on multiple hosts, support serial or parallel execution. o Handle quotes, dollar signs, etc. correctly, especially when passing the command to ssh. This module is designed to run multiple commands in a single shell, wrapping them in standard shell commands to automatically add this functionality. METHODS new $obj = new Shell::Cmd; This creates a new object containing commands. version $vers = $obj->version(); Returns the version of this module. run $obj->run(); This prepares a shell script based on the commands and options entered and runs it as appropriate. There are several different ways in which the commands can be run, and these are described in the options method below. If $obj is in 'dry-run' mode, the method should be called as: ($script) = $obj->run(); In this mode, the commands are not actually executed. Instead, the script is built and returned. By default, the script returned is the full script that adds all of the functionality above. If $obj is in 'run' mode, the method should be called as: ($err) = $obj->run(); The script is run, and output is sent directly to STDOUT and STDERR as appropriate for the options specified. The return value of the method is the exit code of the script (which is the exit code of the final failing command). If $obj is in 'script' mode, the output from the commands are kept for further analysis. The method should be called as: @out = $obj->run(); Here, @out is a list of command output descriptors: @out = ( $err, [ $cmd_1, $out_1, $err_1 ], [ $cmd_2, $out_2, $err_2 ], ... ) Each $cmd_i is either the i'th command, or an empty string (if you are not echoing the commands). Each $out_i and $err_i are STDOUT and STDERR from the i'th command. They will be empty if the appropriate output is not kept (i.e. if STDOUT is not being kept, then $out_i will be empty in all cases). For example, if you are echoing commands, but only keeping STDOUT and STDERR for failed commands, $cmd_i will contain the command in all cases, but $out_i and $err_i will be empty for all but a command that failed. If one of the commands fail, $err will be set to 1, and only the commands that were tried will be included in @out (i.e. all of them up to and including the one that failed). ssh $obj->ssh(@hosts); This behaves similar to the run method except it will run the commands on each host in @hosts using ssh. In dry-run mode, the call is: @script = $obj->ssh(@hosts); In 'run' mode, the call is: @err = $obj->ssh(@hosts); In 'script' mode, the call is: ($out1,$out2,...) = $obj->ssh(@hosts); where $out1 is a reference to the list of output on the 1st host, etc. Note that when running in parallel in real-time, the output that is printed to the terminal will be a mix of the output from each of the hosts the commands are being run on. flush $obj->flush( [@opts] ); If @opts is not given, it removes the commands, directory, and environment stored in the object, and resets the options to the default values. If @opts is given, it can include any of the following: commands : clears commands dire : clears the directory env : clears the environment opts : clears all options dire $err = $obj->dire($dire); This method is used to specify the directory where all of the the commands should be run. This can be overridden on a per-command basis using the cmd method, but all commands not specifically set will run in this directory. An error is returned if $dire does not exist. env $obj->env($var [,$val]); This can be called any number of times to set some environment variables. If $val is not passed in, the environment variable will be explicitly unset. options $err = $obj->options(%options); This can be used to set some options about what will be done when the commands are run. The hash is of the form: %options = ( OPTION => VALUE, OPTION => VALUE, ...) The options are defined in the GLOBAL OPTIONS section below. cmd $err=$obj->cmd($cmd [,\%options], $cmd [,\%options], ...); Here, each $cmd is a string containing a command, or a listref where each element in the list is a command. In the second form, the list of commands are alternates to try until one succeeds, and the command only fails if all of the alternates fail. This might be used to specify different paths to an executable, or different forms that might be available on different operating systems. For example, if you wanted to run a command to get the contents of a web site, and you didn't know which of curl, wget, or lftp were available, you might use something like this: $err = $obj->cmd([ "wget $URL", "curl $URL", "lftp $URL"]); and in this case, it would try wget, and if that failed, it would try curl, and if that failed, it would try lftp. The command will only fail if all three alternates fail. Each command can have options passed in. These options apply only to a single command, and are described in the PER-COMMAND OPTIONS section below. All of the commands stored in $obj will be run in a single shell, so it is fine to gather information in one command and store it in a shell variable for use in a later command. Also, it is not necessary (or desirable) to include a trailing semi-colon on the command as these will be added automatically where appropriate. An error is returned if any of the arguments are invalid. GLOBAL OPTIONS The following global options exist can can be set using the options method: run The run option determines how the commands will be handled by the run method. The following values are available. dry-run run script The default option is to use 'run' mode. The 'dry-run' mode will simply return the script that would have been run, but it doesn't actually run it. The 'run' mode is the standard way to run commands in an interactive setting. It will run the commands in real-time and allow you to watch STDOUT and/or STDERR (depending on the options you choose) as they run. The 'script' mode is more appropriate for running in an unattended script. It gathers the output and post-processes it allowing for more useful handling of the output. For example, you could discard the output from commands that succeed and keep only the output for the one that failed. output The output option can be one of the following: both merged stdout stderr quiet In the 'run' or 'dry-run' modes, these determine what output will be displayed (in 'run' mode) or would be display if the script were run (in 'dry-run' mode). It can display only STDOUT, only STDERR, or both, or both can be discarded with the 'quiet' option. The default is to include 'both'. The 'merged' option is used to display both but merge STDERR into STDOUT (using a 2>&1 redirection). The default in both cases is 'both'. In the 'script' mode, the output is determined by using a combination of the 'output' and 'f-output' options as described next. f-output The f-output option can be one of the following: f-both f-merged f-stdout f-stderr f-quiet and is only used in 'script' mode. In 'script' mode, all of the output is gathered and analyzed after the commands are run, so the output can be tailored to whether a command completed successfully or failed. The 'output' option controls what output is given for commands that completed successfully, and the 'f-output' option controls the output given for a failed command. It should be noted that since the command runs fully before it can be seen whether it failed or not, STDOUT/STDERR will either be separate or merged based on the first option. If the first option is 'both', 'stdout, or 'stderr', they will be separate, and the 'f-merged' option is not supported (it will be replaced by 'f-both'). If the first option is 'merged', then the 'f-both', 'f-stdout', and 'f-stderr' options are not supported and will be replaced by 'f-merged'. The default to these are 'both' and 'f-both'. simple The simple option is ignored except in dry-run mode, or in the case of printing commands past a failure. The script produced in dry-run mode can either be the full script (containing all of the shell commands necessary to implement the functionality) or a much more simple script containing only the shell commands entered explicitly without the extra shell commands to add error checking and other functionality. If the 'simple' option is true, the simple script is produced. echo The 'echo' option is only used in 'run' and 'script' modes. With it, you can choose whether or not the commands should be displayed before they are run. The values are: echo noecho failed With 'echo' and 'noecho', commands will be displayed or NOT displayed respectively. The 'failed' option is only available in the 'script' mode. With this option, commands that succeed will not be displayed, but a command that fails will be displayed. failure When a command fails, there are several alternatives that can be done. Values for this option are: exit display continue The default is 'exit'. With this option, the shell exits after a failed command. With the 'display' option, remaining commands are displayed (and the 'simple' option is used to determine how much detail is shown) but they are not run. With the 'continue' option, remaining command are executed, but the overall exit values is still set to point at the first failed command. ssh_num When running a command on multiple hosts via SSH, it is possible to run them serially (one at a time) or in parallel. This option can be set to a number 0 or more. If the number is 1, then only a single ssh connection will be made at a time so the hosts will all be contacted serially. If the option is set to 0, all of the hosts will be run simultaneously. If the option is set to N, N simultaneous connections will be allowed. ssh_sleep When running a command on multiple hosts via SSH, it is sometimes desirable to stagger them slightly so multiple copies are running at the same time, but not at EXACTLY the same time. If this option is set to 0 (the default), all of the commands will be run with no delay. If it is set to the value N, commands will sleep a random amount of time (from 0 to N seconds) before running. ssh:XXX When running a command on a remote host via. ssh, the Net::OpenSSH module is used. Every option that can be passed to the 'new' method can be set here. For example, if you want to call Net::OpenSSH as: $ssh = Net::OpenSSH->new($host, user => $user_name); just set the option: ssh:user = $user_name PER-COMMAND OPTIONS The following options exists that can be applied to individual commands. They can be set in the cmd method. dire The dire option refers to the directory which this single command should be executed in. The value of the option is the directory. This will basically wrap a command in: CURR_DIR=`pwd` cd $dire COMMAND cd $CURR_DIR flow The value of the flow option can be '+', '-', or '='. If a command is one which is used to control the flow of a script (such as an if-else-fi structure or a do-while loop), you must use the flow option for all parts of it so it so it will handle command echoing, error handling, and output handling correctly (none of which apply to flow commands). It will also indent things correctly in the script to make it easier to read. If the flow option is used, the dire option may not be used, and only a single command (i.e. no alternates) may be given. The value of 'flow' may be '+' (which means you are beginning a flow structure), '-' meaning you are closing the flow structure, or '=' meaning you are continuing the current flow structure. For example, you could have: $obj->cmd('if [ "\$i" = "1" ]; then', { 'flow' => '+' }, ... 'elif [ "\$i" = "2" ]; then', { 'flow' => '=' }, ... 'fi', { 'flow' => '-' } ); noredir If the noredir option is included, no command line redirection is done for this command. Most commands automatically redirect STDOUT and STDERR based on the output and f-output global options. If the command explicitly sends these to somewhere (such as a log file or temporary file), use the noredir option so automatic redirection is not done. retry, sleep The retry and sleep options can be used to retry a command. Sometimes, a command may fail but running it a second time can succeed. Often, a command completes, but for various reasons, it takes a certain amount of time after the command completes for the full results to take effect. A later command might be run before those results have taken effect, but rerunning it a few seconds later would succeed. With the retry option, you can retry a command. The value of the retry option should be an integer (N). If N is greater than 1, the command will be run up to N times total. Any other value of N will be ignored, and the command will run only a single time. There can be an optional sleep time between running the command. The optional sleep option (which should also be an integer) sets the number of seconds between retries. If the value is 0, or not an integer, there will be no delay between retries. This command will be marked as failed only if all of the retries fail. You cannot retry a flow command. check Sometimes, a command is written such that the exit code does not accurately reflect whether the command failed or not. It may produce a zero exit code but still have failed, or it may have succeeded but still produce an error code. In these cases, you can supply a command with this option which will check the result of the command and set the error flag appropriately. If the command succeeded, the error flag should be set to zero. If it failed, it should be set to something non-zero. If this is given for a command which has alternatives, it will be run after every alternative. KNOWN PROBLEMS Minimal support for complex scripts These methods work best for simple lists of commands. When you wish to add flow (if...then...else, while...do, etc.) these must be marked as such using the 'flow' option in the 'cmd' method. LICENSE This script is free software; you can redistribute it and/or modify it under the same terms as Perl itself. AUTHOR Sullivan Beck (sbeck@cpan.org)