NAME
    Class::Date - Class for easy date and time manipulation

SYNOPSIS
      use Class::Date qw(date localdate gmdate);
  
      # creating absolute date object (local time)
      $date = new Class::Date [$year,$month,$day,$hour,$min,$sec];
      $date = date [$year,$month,$day,$hour,$min,$sec]; 
        # "date" is an exportable function, the same as Class::Date->new
      $date = date { year => $year, month => $month, day => $day,
        hour => $hour, min => $min, sec => $sec };
      $date = date "2001-11-12 07:13:12";
      $date = localdate "2001-12-11";
      ...

      # creating absolute date object (GMT)
      $date = new Class::Date [$year,$month,$day,$hour,$min,$sec],1;
      $date = gmtime "2001-11-12 17:13";
      ...

      # creating relative date object
      # (normally you don't need to create this object explicitly)
      $reldate = new Class::Date::Rel "3Y 1M 3D 6h 2m 4s";
      $reldate = new Class::Date::Rel "6Y";
      $reldate = new Class::Date::Rel $secs;  # secs
      $reldate = new Class::Date::Rel [$year,$month,$day,$hour,$min,$sec];
      $reldate = new Class::Date::Rel { year => $year, month => $month, day => $day,
        hour => $hour, min => $min, sec => $sec };
      $reldate = new Class::Date::Rel "2001-11-12 07:13:12";
      $reldate = new Class::Date::Rel "2001-12-11";

      # getting values of an absolute date object
      $date;              # prints the date in default output format (see below)
      $date->year;        # year, e.g: 2001
      $date->_year;       # year - 1900, e.g. 101
      $date->yr;          # 2-digit year 0-99, e.g 1
      $date->mon;         # month 1..12
      $date->month;       # same as prev.
      $date->_mon;        # month 0..11
      $date->_month;      # same as prev.
      $date->day;         # day of month
      $date->mday;        # day of month
      $date->day_of_month;# same as prev.
      $date->hour;
      $date->min;
      $date->minute;      # same as prev.
      $date->sec;
      $date->second;      # same as prev.
      $date->wday;        # 1 = Sunday
      $date->_wday;       # 0 = Sunday
      $date->day_of_week; # same as prev.
      $date->yday;        
      $date->day_of_year; # same as prev.
      $date->isdst;       # DST?
      $date->daylight_savings; # same as prev.
      $date->epoch;       # UNIX time_t
      $date->monname;     # name of month, eg: March
      $date->monthname;   # same as prev.
      $date->wdayname;    # Thursday
      $date->day_of_weekname; # same as prev.
      $date->hms          # 01:23:45
      $date->ymd          # 2000/02/29
      $date->mdy          # 02/29/2000
      $date->dmy          # 29/02/2000
      $date->string       # 2000-02-29 12:21:11 (format can be changed, look below)
      "$date"             # same as prev.
      $date->tzoffset     # timezone-offset
      $date->strftime($format) # POSIX strftime (without the huge POSIX.pm)

      ($year,$month,$day,$hour,$min,$sec)=$date->array;
      ($year,$month,$day,$hour,$min,$sec)=@{ $date->aref };

      ($sec,$min,$hour,$day,$mon,$year,$wday,$yday,$isdst)=$date->struct;
      ($sec,$min,$hour,$day,$mon,$year,$wday,$yday,$isdst)=@{ $date->sref };

      $hash=$date->href;
      print $hash->{year}."-".$hash->{month}. ... $hash->{sec} ... ;
  
      %hash=$date->hash;

      # date format changes
      {
        local $Class::Date::DATE_FORMAT="%Y%m%d%H%M%S";
        print $date       # result: 20011222000000
        $Class::Date::DATE_FORMAT=undef;
        print $date       # result: Thu Oct 13 04:54:34 1994
        $Class::Date::DATE_FORMAT="%Y/%m/%d"
        print $date       # result: 1994/10/13
      }

      # adjusting DST in calculations  (see the doc)
      $Class::Date::DST_ADJUST = 1; # this is the default
      $Class::Date::DST_ADJUST = 0;

      # getting values of a relative date object
      $reldate;              # reldate in seconds (assumed 1 month = 2_629_744 secs)
      $reldate->year;
      $reldate->mon;
      $reldate->month;       # same as prev.
      $reldate->day;
      $reldate->hour;
      $reldate->min;
      $reldate->minute;      # same as prev.
      $reldate->sec;         # same as $reldate
      $reldate->second;      # same as prev.
      $reldate->sec_part;    # "second" part of the relative date
      $reldate->mon_part;    # "month"  part of the relative date

      # arithmetic with dates:
      print date([2001,12,11,4,5,6])->truncate; 
                                   # will print "2001-12-11"
      $new_date = $date+$reldate;
      $date2    = $date+'3Y';      # 3 Year
      $date3    = $date+[1,2,3];   # $date plus 1 year, 2 month, 3 days
      $date4    = $date+'3-1-5'    # $date plus 3 year, 1 month, 5 days

      $new_date = $date-$reldate;
      $date2    = $date-'3Y';      # 3 Year
      $date3    = $date-[1,2,3];   # $date minus 1 year, 2 month, 3 days
      $date4    = $date-'3-1-5'    # $date minus 3 year, 1 month, 5 days

      $new_reldate = $date1-$date2;
      $reldate2 = Class::Date->new('2000-11-12')-'2000-11-10';
      $reldate3    = $date3-'1977-11-10';

      $days_between = (Class::Date->new('2001-11-12')-'2001-07-04')->day;

      # comparison between absolute dates
      print $date1 > $date2 ? "I am older" : "I am younger";

      # comparison between relative dates
      print $reldate1 > $reldate2 ? "I am faster" : "I am slower";

DESCRIPTION
    This module is intended to provide a general-purpose date and datetime
    type for perl. You have a Class::Date class for absolute date and
    datetime, and have a Class::Date::Rel class for relative dates.

    You can use "+", "-", "<" and ">" operators as with native perl data
    types.

USAGE
    If you want to use a date object, you need to do the following:

      - create a new object
      - do some operations (+, -, comparison)
      - get result back

  Creating a new date object

    You can create a date object by the "date", "localdate" or "gmdate"
    function, or by calling the Class::Date constructor.

    "date" and "Class::Date->new" are equivalent, both has two arguments:
    The date and if the second argument is true then the date interpreted as
    GMT not local.

      $date1= date [2000,11,12];
      $date2= Class::Date->new([2000,06,11,13,11,22],1);

    "localdate $x" is equivalent to "date $x", "gmdate $x" is equivalent to
    "date $x,1":

      $date1= localdate [2000,11,12];
      $date2= gmdate [2000,4,2,3,33,33];

      $date = localdate(time);

    The format of the accepted input date can be:

    [$year,$month,$day,$hour,$min,$sec]
        An array reference with 6 elements. The missing elements have
        default values (year: 2000, month, day: 1, hour, min, sec: 0)

    { year => $year, month => $month, day => $day, hour => $hour, min =>
    $min, sec => $sec }
        A hash reference with the same 6 elements as above.

    "YYYYMMDDhhmmss"
        A mysql-style timestamp value, which consist of at least 14 digit.

    "973897262"
        A valid 32-bit integer: This is parsed as a unix time.

    "YYYY-MM-DD hh::mm:ss"
        A standard ISO date format. Additional ".fraction" part is ignored.

    additional input formats
        You can specify "-DateParse" as an import parameter, e.g:

          use Class::Date qw(date -DateParse);

        With this, the module will try to load Date::Parse module, and if it
        find it then all these formats can be used as an input. Please refer
        to the Date::Parse documentation (this part is not tested).

  Operations

    addition
        You can add the following to a Class::Date object:

          - a valid Class::Date::Rel object
          - anything, that can be used for creating a new Class::Date::Rel object

        It means that you don't need to create a new Class::Date::Rel object
        every time when you add something to the Class::Date object, it
        creates them automatically:

          $date= Class::Date->new('2001-12-11')+Class::Date::Rel->new('3Y');

        is the same as:

          $date= date('2001-12-11')+'3Y';

        You can provide a Class::Date::Rel object in the following form:

        array ref
            The same format as seen in Class::Date format, except the
            default values are different: all zero.

        hash ref
            The same format as seen in Class::Date format, except the
            default values are different: all zero.

        "973897262"
            A valid 32-bit integer is parsed as seconds.

        "YYYY-MM-DD hh::mm:ss"
            A standard ISO date format, but this is parsed as relative date
            date and time, so month, day and year can be zero (and defaults
            to zero).

        "12Y 6M 6D 20h 12m 5s"
            This special string can be used if you don't want to use the ISO
            format. This string consists of whitespace separated tags, each
            tag consists of a number and a unit. The units can be:

              Y: year
              M: month
              D: day
              h: hour
              m: min
              s: sec

            The number and unit must be written with no space between them.

    substraction
        The same rules are true for substraction, except you can substract
        two Class::Date object from each other, and you will get a
        Class::Date::Rel object:

          $reldate=$date1-$date2;
          $reldate=date('2001-11-12 12:11:07')-date('2001-10-07 10:3:21');

        In this case, the "month" field of the $reldate object will be 0,
        and the other fields will contain the difference between two dates;

    comparison
        You can compare two Class::Date objects, or one Class::Date object
        and another data, which can be used for creating a new Class::Data
        object.

        It means that you don't need to bless both objects, one of them can
        be a simple string, array ref, hash ref, etc (see how to create a
        date object).

          if ( date('2001-11-12') > date('2000-11-11') ) { ... }

        or

          if ( date('2001-11-12') > '2000-11-11' ) { ... }

    truncate
        You can chop the time value from this object (set hour, min and sec
        to 0) with the "truncate" or "trunc" method. It does not modify the
        specified object, it returns with a new one.

    Operations with Class::Date::Rel
        The Class::Date::Rel object consists of a month part and a day part.
        Most people only use the "day" part of it. If you use both part,
        then you can get these parts with the "sec_part" and "mon_part"
        method. If you use "sec", "month", etc. methods or if you use this
        object in a mathematical conent, then this object is converted to
        one number, which is interpreted as second. The conversion is based
        on a 30.436 days month. Don't use it too often, because it is
        confusing...

        If you use Class::Date::Rel in an expression with other Class::Date
        or Class::Date::Rel objects, then it does what is expected:

          date('2001-11-12')+'1M' will be '2001-12-12'

        and

          date('1996-02-11')+'2M' will be '1996-04-11'

  Accessing data from a Class::Date and Class::Date::Rel object

    You can use the methods methods described at the top of the document if
    you want to access parts of the data which is stored in a Class::Date
    and Class::Date::Rel object.

DST_ADJUST
    $DST_ADJUST is an importable variable, and is a very important
    configuration option.

    If it is set to true (default), then it adjusts the date and time when
    the operation switches the border of DST. You will see the difference if
    you run this code:

      $Class::Date::DST_ADJUST=0;
      for (my $date=localdate("2000-06-11");$date<"2001-4-5";$date+='1D') {
        print $date."\n";
      }

      $Class::Date::DST_ADJUST=1;
      for (my $date=localdate("2000-06-11");$date<"2001-4-5";$date+='1D') {
        print $date."\n";
      }

INTERNALS
    This module uses operator overloading very heavily. I've found it quite
    stable, but I am afraid of it a bit.

    Date::Class object is an array reference.

    Date::Class::Rel object is an array reference, which contains month and
    second information. I need to store it as an array ref, because array
    and month values cannot be converted into seconds, because of our super
    calendar.

    You can add code references to the @Class::Date::NEW_FROM_SCALAR and
    @Class::Date::Rel::NEW_FROM_SCALAR. These arrays are iterated through
    when a scalar-format date must be parsed. These arrays only have one or
    two values at initialization. The parameters which the code references
    got are the same as the "new" method of each class. In this way, you can
    personalize the date parses as you want.

    As of 0.90, the Class::Date has been rewritten. A lot of code and design
    decision has been borrowed from Matt Sergeant's Time::Object, and there
    will be some incompatibility with the previous public version (0.5). I
    tried to keep compatibility methods in Class::Date. If you have problems
    regarding this, please drop me an email with the description of the
    problem, and I will set the compatibility back.

    As of 0.90 this code is in alpha status, and I want to release the beta
    versions (0.91-) soon, and then I want to release the version 1.0 if no
    bugs can be found in that period.

BUGS
    This module uses the POSIX functions for date and time calculations, so
    it is not working for dates beyond 2038 and before 1902. I hope that
    someone will fix this with new time_t in libc. If you really need dates
    over 2038, you need to completely rewrite this module or use Date::Calc
    or other date modules.

COPYRIGHT
    Copyright (c) 2001 Szabó, Balázs (dLux)

    All rights reserved. This program is free software; you can redistribute
    it and/or modify it under the same terms as Perl itself.

    Portions Copiright (c) Matt Sergeant

AUTHOR
      dLux (Szabó, Balázs) <dlux@kapu.hu>

CREDITS
      Lots of code are borrowed from the Time::Object module by 
        Matt Sergeant <matt@sergeant.org>

SEE ALSO
    perl, Time::Object, Date::Calc.