From: R. Venkateswaran (venki@lucent.com)
Date: Tue Dec 21 1999 - 16:46:03 CET
On Monday, December 13, 1999 19:18 PM, Michele Andreoli
[SMTP:m.andreoli@tin.it] wrote:
> On Mon, Dec 13, 1999 at 10:26:57AM -0600, R.
Venkateswaran
> nicely wrote:
> > Then I tried to
> > test my modem with minicom. My modem is connected to
> > /dev/ttyS0. When I start minicom, the DTR and RTS
lights
> > go
> > ON, so I know I am using the right modem port. But, I
> > don't
> > get "OK" response from the modem for my AT commands.
> >
>
>
> When you say:
>
> # miterm -l /dev/ttyS0
> # atz
>
> what you get?
>
Michele,
This problem has been resolved. Since I had a 14.4 kbps
modem, I had to set the serial port baud setting to 57600,
insttead of the default 115200.
setserial -b /dev/ttyS0 baud_base 57600
Everything works fine now.
Thanks,
venki
-- R.Venkateswaran (Venki) [email -> mailto:venki@lucent.com] Lucent Technologies Bell Labs, Phone: (630)-979-6253 263 Shuman Blvd., Room 2E-241, Naperville, IL 60566. --------------------------------------------------------------------- To unsubscribe, e-mail: mulinux-unsubscribe@sunsite.auc.dk For additional commands, e-mail: mulinux-help@sunsite.auc.dk
This archive was generated by hypermail 2.1.6 : Sat Feb 08 2003 - 15:27:12 CET